Hi Dmitry, On Tuesday 20 July 2010 20:07:45 Dmitry Torokhov wrote: > On Tuesday, July 20, 2010 04:06:08 am Laurent Pinchart wrote: > > On Saturday 17 July 2010 23:37:05 Dmitry Torokhov wrote: > > > On Fri, Jul 16, 2010 at 05:28:43PM +0200, Laurent Pinchart wrote: > > > > I've spent the day debugging a kernel crash in the USB networking > > > > code to find out the problem was caused by a buffer overrun in the > > > > TWL4030 keypad driver. > > > > > > > > The Nokia RX51 board code > > > > (arch/arm/mach-omap2/board-rx51-peripherals.c) defines a key map for > > > > the matrix keypad keyboard. The hardware seems to use all of the 8 > > > > rows and 8 columns of the keypad, although not all possible locations > > > > are used. > > > > > > > > The TWL4030 supports keypads with at most 8 rows and 8 columns. Most > > > > keys are defined with a row and column number between 0 and 7, except > > > > > > > > KEY(0xff, 2, KEY_F9), > > > > KEY(0xff, 4, KEY_F10), > > > > KEY(0xff, 5, KEY_F11), > > > > > > > > The row number is set to 0xff. As the generic matrix keypad support > > > > (include/linux/input/matrix_keypad.h) supports at most 16 rows and 16 > > > > columns, it masks all but the lower 4 bits of the row and column > > > > numbers in the KEY macro. > > > > > > [..snipped..] > > > > > > Thanks for the report. Could yo uplease try the patch below and let me > > > know if it works. > > > > The patch fixes the crash at startup, > > Great. > > > but the F9, F10 and F11 key events > > are never reported. That might be because those keys are not wired up to > > anything though. > > I would not know... If you see all keys on the device being handled then I > guess it's the case... Tony, Amit, any ideas? > > > All keys on the keyboard, as well as the F7 and F8 keys > > (volume up and down on the of the case) > > I guess we need to remap them to KEY_VOLUMEUP and KEY_VOLUMEDOWN then. So > is F7 == Up and F8 == Down?
It's the other way around. F7 is volume down, F8 is volume up. Note that the same keys have different meanings depending on the context. In the photo viewer, they are used to zoom (volume down zooms out, volume up zooms in). > > generate the proper events. All other "keys" (keyboard slider switch, > > power button, focus button, lock switch, proximity sensor) report events > > through other devices. > > > > > I have some concerns with the keymap assignments, I see that Amit > > > changed them during KEY(col, row) -> KEY(row, col) conversion. I marked > > > the entries I am concerned with with XXX. > > > > F7, F8, right alt and left shift are properly mapped. I don't know what > > F9, F10 and F11 are supposed to be. > > OK, thanks. Since you don't crash anymore I think it is worth pushing > it out. -- Regards, Laurent Pinchart -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
