Remove the hard coded irq information, and instead take
the irq information from the board private data
which is supplied by the sdio function.
Signed-off-by: Ohad Ben-Cohen <o...@wizery.com>
---
drivers/net/wireless/wl12xx/wl1271_sdio.c | 14 ++++++++------
1 files changed, 8 insertions(+), 6 deletions(-)
diff --git a/drivers/net/wireless/wl12xx/wl1271_sdio.c
b/drivers/net/wireless/wl12xx/wl1271_sdio.c
index 571c6b9..75901a6 100644
--- a/drivers/net/wireless/wl12xx/wl1271_sdio.c
+++ b/drivers/net/wireless/wl12xx/wl1271_sdio.c
@@ -28,15 +28,14 @@
#include <linux/mmc/sdio_func.h>
#include <linux/mmc/sdio_ids.h>
#include <linux/mmc/card.h>
+#include <linux/mmc/host.h>
+#include <linux/wl12xx.h>
#include <plat/gpio.h>
#include "wl1271.h"
#include "wl12xx_80211.h"
#include "wl1271_io.h"
-
-#define RX71_WL1271_IRQ_GPIO 42
-
static const struct sdio_device_id wl1271_devices[] = {
{ SDIO_DEVICE(SDIO_VENDOR_ID_TI, SDIO_DEVICE_ID_TI_WL1271) },
{}
@@ -178,6 +177,7 @@ static int __devinit wl1271_probe(struct sdio_func *func,
const struct sdio_device_id *id)
{
struct ieee80211_hw *hw;
+ struct wl12xx_platform_data *wlan_data;
struct wl1271 *wl;
int ret;
@@ -197,9 +197,11 @@ static int __devinit wl1271_probe(struct sdio_func *func,
/* Grab access to FN0 for ELP reg. */
func->card->quirks |= MMC_QUIRK_LENIENT_FN0;
- wl->irq = gpio_to_irq(RX71_WL1271_IRQ_GPIO);
- if (wl->irq < 0) {
- ret = wl->irq;
+ wlan_data = mmc_get_embedded_data(func->card->host);
+ if (wlan_data && wlan_data->irq)
+ wl->irq = wlan_data->irq;
+ else {
+ ret = -EINVAL;
wl1271_error("could not get irq!");
goto out_free;
}
--
1.7.0.4
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
