Hi,
I'm trying out u-boot-2010.06 and linux-omap-2.6.34, and I'm using the
omap3_defconfig.
I get the following error upon boot:
[ 2.097320] Waiting for root device /dev/mmcblk0p2...
[ 2.235595] mmc0: new SD card at address b874
[ 2.243530] mmcblk0: mmc0:b874 SU02G 1.87 GiB (ro)
[ 2.250213] mmcblk0: p1 p2
[ 2.323638] VFS: Cannot open root device "mmcblk0p2" or unknown-block(179,2)
[ 2.330871] Please append a correct "root=" boot option; here are the
available partitions:
[ 2.339477] b300 1971712 mmcblk0 driver: mmcblk
[ 2.344848] b301 40131 mmcblk0p1
[ 2.349182] b302 514080 mmcblk0p2
[ 2.353973] Kernel panic - not syncing: VFS: Unable to mount root fs on
unknown-block(179,2)
What could be wrong? I have set the correct root device which is /dev/mmcblk0p2.
Here are my environment variables:
Texas Instruments X-Loader 1.41 - Cyomap
Starting on with MMC
Unsupported Chip!
Reading boot sector
201508 Bytes Read from MMC
Starting OS Bootloader from MMC...
U-Boot 2010.06 (Aug 04 2010 - 00:18:55)
OMAP3530-GP ES3.1, CPU-OPP2 L3-165MHz
OMAP3 Beagle board + LPDDR/NAND
I2C: ready
DRAM: 256 MiB
NAND: 512 MiB
In: serial
Out: serial
Err: serial
Board revision Ax/Bx
Die ID #5c8e00040000000004036aba0500f004
Hit any key to stop autoboot: 0
OMAP3 beagleboard.org # printenv
bootcmd=if mmc init; then if run loadbootscript; then run bootscript; else if
run loaduimage; then run mmcboot; else run nandboot; fi; fi; else run nandboot;
fi
bootdelay=10
baudrate=115200
loadaddr=0x82000000
usbtty=cdc_acm
console=ttyS2,115200n8
vram=12M
dvimode=1024x768mr...@60
mmcroot=/dev/mmcblk0p2 rw
mmcrootfstype=ext3 rootwait
nandroot=/dev/mtdblock4 rw
nandrootfstype=jffs2
mmcargs=setenv bootargs console=${console} vram=${vram}
omapfb.mode=dvi:${dvimode} omapfb.debug=y omapdss.def_disp=${defaultdisplay}
root=${mmcroot} rootfstype=${mmcrootfstype}
nandargs=setenv bootargs console=${console} vram=${vram}
omapfb.mode=dvi:${dvimode} omapfb.debug=y omapdss.def_disp=${defaultdisplay}
root=${nandroot} rootfstype=${nandrootfstype}
loadbootscript=fatload mmc 0 ${loadaddr} boot.scr
bootscript=echo Running bootscript from mmc ...; source ${loadaddr}
loaduimage=fatload mmc 0 ${loadaddr} uImage
mmcboot=echo Booting from mmc ...; run mmcargs; bootm ${loadaddr}
nandboot=echo Booting from nand ...; run nandargs; nand read ${loadaddr} 280000
400000; bootm ${loadaddr}
dieid#=5c8e00040000000004036aba0500f004
defaultdisplay=lcd
Environment size: 1134/131068 bytes
OMAP3 beagleboard.org #
Best regards,
Elvis Dowson
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
