From: Mike Turquette <[email protected]> mach-omap/voltage.c incorrectly called omap_get_mpuss_device and omap_get_l3_device. The correct function names are omap2_get_mpuss_device and omap2_get_l3_device respectively.
This fixes a compile break. Test on OMAP3430 SDP. Signed-off-by: Mike Turquette <[email protected]> --- This patch is meant to apply to Kevin's pm-srf branch. Without it compilation for OMAP3 is broken. arch/arm/mach-omap2/voltage.c | 4 ++-- 1 files changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-omap2/voltage.c b/arch/arm/mach-omap2/voltage.c index e7055f6..148e4d4 100644 --- a/arch/arm/mach-omap2/voltage.c +++ b/arch/arm/mach-omap2/voltage.c @@ -385,7 +385,7 @@ static void __init omap3_vdd_data_configure(int vdd) vdd_info[vdd].volt_clk = clk_get(NULL, "dpll1_ck"); WARN(IS_ERR(vdd_info[vdd].volt_clk), "unable to get clock for VDD%d\n", vdd + 1); - vdd_info[vdd].opp_dev = omap_get_mpuss_device(); + vdd_info[vdd].opp_dev = omap2_get_mpuss_device(); vdd_info[vdd].vp_reg.tranxdone_status = OMAP3430_VP1_TRANXDONE_ST_MASK; vdd_info[vdd].cmdval_reg = OMAP3_PRM_VC_CMD_VAL_0_OFFSET; @@ -411,7 +411,7 @@ static void __init omap3_vdd_data_configure(int vdd) vdd_info[vdd].volt_clk = clk_get(NULL, "l3_ick"); WARN(IS_ERR(vdd_info[vdd].volt_clk), "unable to get clock for VDD%d\n", vdd + 1); - vdd_info[vdd].opp_dev = omap_get_l3_device(); + vdd_info[vdd].opp_dev = omap2_get_l3_device(); vdd_info[vdd].vp_reg.tranxdone_status = OMAP3430_VP2_TRANXDONE_ST_MASK; vdd_info[vdd].cmdval_reg = OMAP3_PRM_VC_CMD_VAL_1_OFFSET; -- 1.7.0.5 -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
