From: stanley.miao <[email protected]> cpu_is_omap3517() and cpu_is_omap3505() are the subgroups of cpu_is_omap34xx(), so we should check cpu_is_omap3517() and cpu_is_omap3505() first, then check cpu_is_omap34xx().
Otherwise, All AM35XX (Sitara) clocks do not get registered and device drivers (ti_hecc, etc...) that depend on those clocks are failing to get the clock and end up with non working device. Signed-off-by: Stanley.Miao <[email protected]> Tested-by: Igor Grinberg <[email protected]> Signed-off-by: Tony Lindgren <[email protected]> --- arch/arm/mach-omap2/clock3xxx_data.c | 14 +++++++------- 1 files changed, 7 insertions(+), 7 deletions(-) diff --git a/arch/arm/mach-omap2/clock3xxx_data.c b/arch/arm/mach-omap2/clock3xxx_data.c index 138646d..dfdce2d 100644 --- a/arch/arm/mach-omap2/clock3xxx_data.c +++ b/arch/arm/mach-omap2/clock3xxx_data.c @@ -3417,7 +3417,13 @@ int __init omap3xxx_clk_init(void) struct omap_clk *c; u32 cpu_clkflg = CK_3XXX; - if (cpu_is_omap34xx()) { + if (cpu_is_omap3517()) { + cpu_mask = RATE_IN_3XXX | RATE_IN_3430ES2PLUS; + cpu_clkflg |= CK_3517; + } else if (cpu_is_omap3505()) { + cpu_mask = RATE_IN_3XXX | RATE_IN_3430ES2PLUS; + cpu_clkflg |= CK_3505; + } else if (cpu_is_omap34xx()) { cpu_mask = RATE_IN_3XXX; cpu_clkflg |= CK_343X; @@ -3432,12 +3438,6 @@ int __init omap3xxx_clk_init(void) cpu_mask |= RATE_IN_3430ES2PLUS; cpu_clkflg |= CK_3430ES2; } - } else if (cpu_is_omap3517()) { - cpu_mask = RATE_IN_3XXX | RATE_IN_3430ES2PLUS; - cpu_clkflg |= CK_3517; - } else if (cpu_is_omap3505()) { - cpu_mask = RATE_IN_3XXX | RATE_IN_3430ES2PLUS; - cpu_clkflg |= CK_3505; } if (omap3_has_192mhz_clk()) -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
