Rajendra Nayak <[email protected]> writes:
> OMAP's have always had PRCM split into PRM for power and reset
> management and CM for clock management.
> In OMAP4 the split (physically) is not very straight forward and
> there are instances of clock management control registers in PRM
> and vice versa.
> However it still makes sense, even on OMAP4 to logically split
> PRCM into PRM and CM for better understanding and to avoid adding
> additonal complexity in higher level frameworks which rely on the
> accessor api;s to do the low level register accesses.
>
> Hence this patch makes sure that any clock management code can
> use the cm_read/write* accessor apis (without knowing the physical split)
> and power and reset management code can use prm_read/write*
> accessor api;s.
>
> To do this the submodule offsets within PRM/CM1 and CM2 have additonal
> info embedded in them specifying what base address to use while
> trying to access registers in the given submodule.
>
> The 16 bit signed submodule offset is defined for OMAP4 as
> <Bit 15> | <Bit 14:13> | <Bit 12:0>
> <Sign bit> | <base identifier> | <submodule offset from base>
>
> For older OMAP's the base identifier is always set to 0.
>
> Signed-off-by: Rajendra Nayak <[email protected]>
> Cc: Kevin Hilman <[email protected]>
> Cc: Paul Walmsley <[email protected]>
> Cc: Benoit Cousson <[email protected]>
I'm OK with this approach, but I don't like the extra overhead added for
every PRCM access on OMAP2/3.
What if you keep the original functions and add new functions for OMAP4,
and use function pointers init'd at runtime (based on the existence of
prcm_mpu_base)
Kevin
> ---
> arch/arm/mach-omap2/cm.h | 4 +-
> arch/arm/mach-omap2/prcm-common.h | 58 ++++++++++++++++++++-----------
> arch/arm/mach-omap2/prcm.c | 68 ++++++++++++++++++++++++++++++++++--
> arch/arm/mach-omap2/prm.h | 4 +-
> 4 files changed, 105 insertions(+), 29 deletions(-)
>
> diff --git a/arch/arm/mach-omap2/cm.h b/arch/arm/mach-omap2/cm.h
> index a02ca30..7b7ef09 100644
> --- a/arch/arm/mach-omap2/cm.h
> +++ b/arch/arm/mach-omap2/cm.h
> @@ -23,9 +23,9 @@
> #define OMAP34XX_CM_REGADDR(module, reg) \
> OMAP2_L4_IO_ADDRESS(OMAP3430_CM_BASE + (module) + (reg))
> #define OMAP44XX_CM1_REGADDR(module, reg) \
> - OMAP2_L4_IO_ADDRESS(OMAP4430_CM1_BASE + (module) +
> (reg))
> + OMAP2_L4_IO_ADDRESS(OMAP4430_CM1_BASE + ((module) &
> (MOD_MASK)) + (reg))
> #define OMAP44XX_CM2_REGADDR(module, reg) \
> - OMAP2_L4_IO_ADDRESS(OMAP4430_CM2_BASE + (module) +
> (reg))
> + OMAP2_L4_IO_ADDRESS(OMAP4430_CM2_BASE + ((module) &
> (MOD_MASK)) + (reg))
>
> #include "cm44xx.h"
>
> diff --git a/arch/arm/mach-omap2/prcm-common.h
> b/arch/arm/mach-omap2/prcm-common.h
> index 995b7ed..b93d33e 100644
> --- a/arch/arm/mach-omap2/prcm-common.h
> +++ b/arch/arm/mach-omap2/prcm-common.h
> @@ -57,10 +57,26 @@
> #define BITFIELD(l_bit, u_bit) \
> (BITS(u_bit) & ~((BITS(l_bit)) >> 1))
>
> -/* OMAP44XX specific module offsets */
> +/*
> + * OMAP44XX specific module offsets
> + * The 16 bit submodule offset is defined for OMAP4 as
> + * <Bit 15> | <Bit 14:13> | <Bit 12:0>
> + * <Sign bit> | <base identifier> | <submodule offset from base>
> + */
>
> -/* CM1 instances */
> +#define DEFAULT_BASE 0x0
> +#define PRM_BASE 0x1
> +#define PRCM_MPU_BASE 0x2
> +#define CM2_BASE 0x3
>
> +#define BASE_ID_SHIFT 13
> +#define MOD_MASK ((1 << BASE_ID_SHIFT)-1)
> +
> +#define PRM_BASE_ID (PRM_BASE << BASE_ID_SHIFT)
> +#define PRCM_MPU_BASE_ID (PRCM_MPU_BASE << BASE_ID_SHIFT)
> +#define CM2_BASE_ID (CM2_BASE << BASE_ID_SHIFT)
> +
> +/* CM1 instances */
> #define OMAP4430_CM1_OCP_SOCKET_MOD 0x0000
> #define OMAP4430_CM1_CKGEN_MOD 0x0100
> #define OMAP4430_CM1_MPU_MOD 0x0300
> @@ -71,19 +87,19 @@
>
> /* CM2 instances */
>
> -#define OMAP4430_CM2_OCP_SOCKET_MOD 0x0000
> -#define OMAP4430_CM2_CKGEN_MOD 0x0100
> -#define OMAP4430_CM2_ALWAYS_ON_MOD 0x0600
> -#define OMAP4430_CM2_CORE_MOD 0x0700
> -#define OMAP4430_CM2_IVAHD_MOD 0x0f00
> -#define OMAP4430_CM2_CAM_MOD 0x1000
> -#define OMAP4430_CM2_DSS_MOD 0x1100
> -#define OMAP4430_CM2_GFX_MOD 0x1200
> -#define OMAP4430_CM2_L3INIT_MOD 0x1300
> -#define OMAP4430_CM2_L4PER_MOD 0x1400
> -#define OMAP4430_CM2_CEFUSE_MOD 0x1600
> -#define OMAP4430_CM2_RESTORE_MOD 0x1e00
> -#define OMAP4430_CM2_INSTR_MOD 0x1f00
> +#define OMAP4430_CM2_OCP_SOCKET_MOD 0x0000 | CM2_BASE_ID
> +#define OMAP4430_CM2_CKGEN_MOD 0x0100 | CM2_BASE_ID
> +#define OMAP4430_CM2_ALWAYS_ON_MOD 0x0600 | CM2_BASE_ID
> +#define OMAP4430_CM2_CORE_MOD 0x0700 | CM2_BASE_ID
> +#define OMAP4430_CM2_IVAHD_MOD 0x0f00 | CM2_BASE_ID
> +#define OMAP4430_CM2_CAM_MOD 0x1000 | CM2_BASE_ID
> +#define OMAP4430_CM2_DSS_MOD 0x1100 | CM2_BASE_ID
> +#define OMAP4430_CM2_GFX_MOD 0x1200 | CM2_BASE_ID
> +#define OMAP4430_CM2_L3INIT_MOD 0x1300 | CM2_BASE_ID
> +#define OMAP4430_CM2_L4PER_MOD 0x1400 | CM2_BASE_ID
> +#define OMAP4430_CM2_CEFUSE_MOD 0x1600 | CM2_BASE_ID
> +#define OMAP4430_CM2_RESTORE_MOD 0x1e00 | CM2_BASE_ID
> +#define OMAP4430_CM2_INSTR_MOD 0x1f00 | CM2_BASE_ID
>
> /* PRM instances */
>
> @@ -102,9 +118,9 @@
> #define OMAP4430_PRM_L4PER_MOD 0x1400
> #define OMAP4430_PRM_CEFUSE_MOD 0x1600
> #define OMAP4430_PRM_WKUP_MOD 0x1700
> -#define OMAP4430_PRM_WKUP_CM_MOD 0x1800
> +#define OMAP4430_PRM_WKUP_CM_MOD 0x1800 | PRM_BASE_ID
> #define OMAP4430_PRM_EMU_MOD 0x1900
> -#define OMAP4430_PRM_EMU_CM_MOD 0x1a00
> +#define OMAP4430_PRM_EMU_CM_MOD 0x1a00 | PRM_BASE_ID
> #define OMAP4430_PRM_DEVICE_MOD 0x1b00
> #define OMAP4430_PRM_INSTR_MOD 0x1f00
>
> @@ -114,10 +130,10 @@
>
> /* PRCM_MPU instances */
>
> -#define OMAP4430_PRCM_MPU_OCP_SOCKET_PRCM_MOD 0x0000
> -#define OMAP4430_PRCM_MPU_DEVICE_PRM_MOD 0x0200
> -#define OMAP4430_PRCM_MPU_CPU0_MOD 0x0400
> -#define OMAP4430_PRCM_MPU_CPU1_MOD 0x0800
> +#define OMAP4430_PRCM_MPU_OCP_SOCKET_PRCM_MOD 0x0000 |
> PRCM_MPU_BASE_ID
> +#define OMAP4430_PRCM_MPU_DEVICE_PRM_MOD 0x0200 | PRCM_MPU_BASE_ID
> +#define OMAP4430_PRCM_MPU_CPU0_MOD 0x0400 | PRCM_MPU_BASE_ID
> +#define OMAP4430_PRCM_MPU_CPU1_MOD 0x0800 | PRCM_MPU_BASE_ID
>
>
> /* 24XX register bits shared between CM & PRM registers */
> diff --git a/arch/arm/mach-omap2/prcm.c b/arch/arm/mach-omap2/prcm.c
> index 4df30d0..124e866 100644
> --- a/arch/arm/mach-omap2/prcm.c
> +++ b/arch/arm/mach-omap2/prcm.c
> @@ -182,13 +182,40 @@ static inline void __omap_prcm_write(u32 value, void
> __iomem *base,
> /* Read a register in a PRM module */
> u32 prm_read_mod_reg(s16 module, u16 idx)
> {
> - return __omap_prcm_read(prm_base, module, idx);
> + u32 base = 0;
> +
> + base = abs(module) >> BASE_ID_SHIFT;
> + module &= MOD_MASK;
> +
> + switch (base) {
> + case PRCM_MPU_BASE:
> + return __omap_prcm_read(prcm_mpu_base, module, idx);
> + case DEFAULT_BASE:
> + return __omap_prcm_read(prm_base, module, idx);
> + default:
> + pr_err("Unknown PRM submodule base\n");
> + }
> + return 0;
> }
>
> /* Write into a register in a PRM module */
> void prm_write_mod_reg(u32 val, s16 module, u16 idx)
> {
> - __omap_prcm_write(val, prm_base, module, idx);
> + u32 base = 0;
> +
> + base = abs(module) >> BASE_ID_SHIFT;
> +
> + switch (base) {
> + case PRCM_MPU_BASE:
> + __omap_prcm_write(val, prcm_mpu_base, module, idx);
> + break;
> + case DEFAULT_BASE:
> + __omap_prcm_write(val, prm_base, module, idx);
> + break;
> + default:
> + pr_err("Unknown PRM submodule base\n");
> + break;
> + }
> }
>
> /* Read-modify-write a register in a PRM module. Caller must lock */
> @@ -219,13 +246,46 @@ u32 prm_read_mod_bits_shift(s16 domain, s16 idx, u32
> mask)
> /* Read a register in a CM module */
> u32 cm_read_mod_reg(s16 module, u16 idx)
> {
> - return __omap_prcm_read(cm_base, module, idx);
> + u32 base = 0;
> +
> + base = abs(module) >> BASE_ID_SHIFT;
> + module &= MOD_MASK;
> +
> + switch (base) {
> + case PRM_BASE:
> + return __omap_prcm_read(prm_base, module, idx);
> + case CM2_BASE:
> + return __omap_prcm_read(cm2_base, module, idx);
> + case DEFAULT_BASE:
> + return __omap_prcm_read(cm_base, module, idx);
> + default:
> + pr_err("Unknown CM submodule base\n");
> + }
> + return 0;
> }
>
> /* Write into a register in a CM module */
> void cm_write_mod_reg(u32 val, s16 module, u16 idx)
> {
> - __omap_prcm_write(val, cm_base, module, idx);
> + u32 base = 0;
> +
> + base = abs(module) >> BASE_ID_SHIFT;
> + module &= MOD_MASK;
> +
> + switch (base) {
> + case PRM_BASE:
> + __omap_prcm_write(val, prm_base, module, idx);
> + break;
> + case CM2_BASE:
> + __omap_prcm_write(val, cm2_base, module, idx);
> + break;
> + case DEFAULT_BASE:
> + __omap_prcm_write(val, cm_base, module, idx);
> + break;
> + default:
> + pr_err("Unknown CM submodule base\n");
> + break;
> + }
> }
>
> /* Read-modify-write a register in a CM module. Caller must lock */
> diff --git a/arch/arm/mach-omap2/prm.h b/arch/arm/mach-omap2/prm.h
> index 588873b..72456cc 100644
> --- a/arch/arm/mach-omap2/prm.h
> +++ b/arch/arm/mach-omap2/prm.h
> @@ -23,9 +23,9 @@
> #define OMAP34XX_PRM_REGADDR(module, reg) \
> OMAP2_L4_IO_ADDRESS(OMAP3430_PRM_BASE + (module) + (reg))
> #define OMAP44XX_PRM_REGADDR(module, reg) \
> - OMAP2_L4_IO_ADDRESS(OMAP4430_PRM_BASE + (module) + (reg))
> + OMAP2_L4_IO_ADDRESS(OMAP4430_PRM_BASE + ((module) & (MOD_MASK))
> + (reg))
> #define OMAP44XX_PRCM_MPU_REGADDR(module, reg)
> \
> - OMAP2_L4_IO_ADDRESS(OMAP4430_PRCM_MPU_BASE + (module) + (reg))
> + OMAP2_L4_IO_ADDRESS(OMAP4430_PRCM_MPU_BASE + ((module) &
> (MOD_MASK)) + (reg))
>
> #include "prm44xx.h"
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
