Hello, On Mon, 13 Sep 2010 07:56:54 -0700 Kevin Hilman <khil...@deeprootsystems.com> wrote:
> Looks like DSS has not been initialized, so is not hitting RET. > > Do you have the DSS driver enabled and built-in? Without this (and > until we have DSS converted to hwmod) the DSS HW is not in a state that > can hit the low power mode. If the DSS driver is allowed to initialize, > even without a panel, it should set the DSS HW in a state that will then > allow RET. Indeed: $ grep DSS .config # CONFIG_OMAP2_DSS is not set It's not enabled simply because it isn't enabled by omap3_defconfig. So maybe it should also be fixed for this ? I have zero knowledge of DSS, but shouldn't the kernel be able to suspend properly even if the DSS driver is disabled ? But maybe it's too complicated to have the DSS init sequence required to allow the system to hit RET outside the DSS driver. Thoughts ? Regards, Thomas -- Thomas Petazzoni, Free Electrons Kernel, drivers, real-time and embedded Linux development, consulting, training and support. http://free-electrons.com -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
