> -----Original Message-----
> From: Kevin Hilman [mailto:[email protected]]
> Sent: Tuesday, September 14, 2010 4:33 AM
> To: [email protected]
> Cc: Varadarajan, Charulatha; Basak, Partha; Tero Kristo
> Subject: [PATCH 2/2] OMAP2+: GPIO: move late PM out of
> interrupts-disabled idle path
>
> From: Kevin Hilman <[email protected]>
>
> Currently, we wait until late in the idle path where interrupts are
> disabled to do runtime-PM-like management for certain special-case
> devices like GPIO.
>
> As a prerequiste to moving GPIO to the new runtime PM framework, move
> this runtime-PM-like code out of the late idle path into new device
> idle and resume functions that can be called before interrupts are
> disabled by CPUidle and/or suspend.
>
> In addition, move all the GPIO-specific logic into the GPIO core
> instead of keeping GPIO-specific knowledge of power-states, context
> saving etc. in the PM core.
>
> Also, call the new device-idle and -resume methods from CPUidle and
> static suspend path.
>
> Signed-off-by: Kevin Hilman <[email protected]>
> ---
> arch/arm/mach-omap2/cpuidle34xx.c | 4 ++
> arch/arm/mach-omap2/pm.h | 2 +
> arch/arm/mach-omap2/pm24xx.c | 2 +-
> arch/arm/mach-omap2/pm34xx.c | 38 +++++++++------------
> arch/arm/plat-omap/gpio.c | 57
> ++++++++++++++++++++++++--------
> arch/arm/plat-omap/include/plat/gpio.h | 4 +--
> 6 files changed, 67 insertions(+), 40 deletions(-)
<<snip>>
>
> diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c
> index 7951eef..b0467c1 100644
> --- a/arch/arm/plat-omap/gpio.c
> +++ b/arch/arm/plat-omap/gpio.c
> @@ -29,6 +29,8 @@
> #include <asm/mach/irq.h>
> #include <plat/powerdomain.h>
>
> +static struct powerdomain *per_pwrdm;
> +
> /*
> * OMAP1510 GPIO registers
> */
> @@ -207,6 +209,9 @@ struct gpio_bank {
> u32 dbck_enable_mask;
> };
>
> +static void omap3_gpio_restore_context(void);
> +static void omap3_gpio_save_context(void);
> +
> #define METHOD_MPUIO 0
> #define METHOD_GPIO_1510 1
> #define METHOD_GPIO_1610 2
> @@ -1778,6 +1783,8 @@ static int __init _omap_gpio_init(void)
> }
> #endif
>
> + if (cpu_class_is_omap2())
> + per_pwrdm = pwrdm_lookup("per_pwrdm");
"per_pwrdm" is not available for OMAP24xx.
>
> #ifdef CONFIG_ARCH_OMAP15XX
> if (cpu_is_omap15xx()) {
> @@ -2074,14 +2081,22 @@ static struct sys_device omap_gpio_device = {
>
> static int workaround_enabled;
>
> -void omap2_gpio_prepare_for_idle(int power_state)
> +void omap2_gpio_prepare_for_idle(void)
> {
> - int i, c = 0;
> - int min = 0;
> + int i, c = 0, min = 0;
> + int per_next_state;
> +
> + if (!per_pwrdm)
> + return;
"per_pwrdm" is not available for OMAP24xx. Hence
this breaks the omap2_gpio_prepare_for_idle() path for OMAP2.
In OMAP2420, all gpio banks are in wakeup domain and
in OMAP2430 GPIO banks 1-4 are in wakeup domain & GPIO5 is
in core domain.
-V Charulatha
> +
> + per_next_state = pwrdm_read_next_pwrst(per_pwrdm);
> + if (per_next_state >= PWRDM_POWER_INACTIVE)
> + return;
>
> if (cpu_is_omap34xx())
> min = 1;
<<snip>>
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
