OMAP4: HSMMC cmd line reset change
The cmd line reset logic is changed in OMAP4 ES2. The new procedure
is to monitor a 0->1 transition and then 1->0 transition.The earlier
logic would fail on ES2 chips because the loop could exit even before
the reset is actually complete.
Signed-off-by: Madhusudhan Chikkature <madhu...@ti.com>
---
drivers/mmc/host/omap_hsmmc.c | 7 +++++++
1 files changed, 7 insertions(+), 0 deletions(-)
diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c
index 4526d27..750ba7d 100644
--- a/drivers/mmc/host/omap_hsmmc.c
+++ b/drivers/mmc/host/omap_hsmmc.c
@@ -976,12 +976,19 @@ static inline void omap_hsmmc_reset_controller_fsm(struct
omap_hsmmc_host *host,
unsigned long bit)
{
unsigned long i = 0;
+ unsigned long j = 0;
unsigned long limit = (loops_per_jiffy *
msecs_to_jiffies(MMC_TIMEOUT_MS));
OMAP_HSMMC_WRITE(host->base, SYSCTL,
OMAP_HSMMC_READ(host->base, SYSCTL) | bit);
+ if (cpu_is_omap44xx() && bit == SRC) {
+ while ((!(OMAP_HSMMC_READ(host->base, SYSCTL) & bit))
+ && (j++ < limit))
+ cpu_relax();
+ }
+
while ((OMAP_HSMMC_READ(host->base, SYSCTL) & bit) &&
(i++ < limit))
cpu_relax();
--
1.7.0.4
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
