* Igor Grinberg <grinb...@compulab.co.il> [100916 01:46]: > Add basic suppot, enable uart and led. > > Signed-off-by: Igor Grinberg <grinb...@compulab.co.il> > --- > arch/arm/mach-omap2/Kconfig | 7 ++ > arch/arm/mach-omap2/Makefile | 1 + > arch/arm/mach-omap2/board-cm-t3517.c | 109 > ++++++++++++++++++++++++++++++++++ > 3 files changed, 117 insertions(+), 0 deletions(-) > create mode 100644 arch/arm/mach-omap2/board-cm-t3517.c
Looks like you're missing the debug uart entry for arch/arm/plat-omap/include/plat/uncompress.h? You can test this by enabling DEBUG_LL and EARLY_PRINTK in your .config, then pass earlyprintk in the kernel cmdline. Might become handy for debugging the early init process for your board. Regards, Tony -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html