On Tue, Sep 28, 2010 at 12:29:01PM +0530, Nayak, Rajendra wrote:
> <snip>...
> > > >
> > > >  static int omap_i2c_init(struct omap_i2c_dev *dev)
> > > > @@ -356,6 +333,7 @@ static int omap_i2c_init(struct omap_i2c_dev *dev)
> > > >         unsigned long fclk_rate = 12000000;
> > > >         unsigned long timeout;
> > > >         unsigned long internal_clk = 0;
> > > > +       struct clk *fclk;
> > > >
> > > >         if (dev->rev >= OMAP_I2C_REV_2) {
> > > >                 /* Disable I2C controller before soft reset */
> > > > @@ -414,7 +392,8 @@ static int omap_i2c_init(struct omap_i2c_dev *dev)
> > > >                  * always returns 12MHz for the functional clock, we can
> > > >                  * do this bit unconditionally.
> > > >                  */
> > > > -               fclk_rate = clk_get_rate(dev->fclk);
> > > > +               fclk = clk_get(dev->dev, "fck");
> > > > +               fclk_rate = clk_get_rate(fclk);
> > > >
> > > >                 /* TRM for 5912 says the I2C clock must be prescaled to 
> > > > be
> > > >                  * between 7 - 12 MHz. The XOR input clock is typically
> > > > @@ -443,7 +422,8 @@ static int omap_i2c_init(struct omap_i2c_dev *dev)
> > > >                         internal_clk = 9600;
> > > >                 else
> > > >                         internal_clk = 4000;
> > > > -               fclk_rate = clk_get_rate(dev->fclk) / 1000;
> > > > +               fclk = clk_get(dev->dev, "fck");
> > > > +               fclk_rate = clk_get_rate(fclk) / 1000;
> > >
> > > You don't put the clk after getting it and using it once?
> > 
> > clk_get needs an equivalent clk_put and not clk_get_rate. clk_get_rate
> > is used to merely know the existing rate of the clock.
> 
> Sorry, I guess you did mean the clk_get above the clk_get_rate does not have
> an equivalent clk_put.
> I could put a clk_put for readability, but a clk_put on OMAP actually does map
> to an empty function.
> See arch/arm/plat-omap/include/plat/clkdev.h
> clk_get merely returns a pointer to the clk struct and does not do any 
> usecounting,
> hence a clk_put does not do anything.

That's no reason to avoid using it.
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to