"Nayak, Rajendra" <[email protected]> writes:
[...]
>
> I forgot to mention, there are similar WARN's that I see on 2430sdp even with
> UART
>
Govidraj, can you look into these UART issues please?
Looks like you might need to double check the bitfields and the
module_offs for both of these.
Thanks,
Kevin
> [ 0.000000] WARNING: at arch/arm/mach-omap2/omap_hwmod.c:1237
> _omap_hwmod_idle+0x28/0xd8()
> [ 0.000000] omap_hwmod: uart3: idle state can only be entered from enabled
> state
> [ 0.000000] Modules linked in:
> [ 0.000000] [<c0053478>] (unwind_backtrace+0x0/0xe4) from [<c00897f4>]
> (warn_slowpath_common+0x4c/0x64)
> [ 0.000000] [<c00897f4>] (warn_slowpath_common+0x4c/0x64) from
> [<c008988c>] (warn_slowpath_fmt+0x2c/0x3c)
> [ 0.000000] [<c008988c>] (warn_slowpath_fmt+0x2c/0x3c) from [<c005d138>]
> (_omap_hwmod_idle+0x28/0xd8)
> [ 0.000000] [<c005d138>] (_omap_hwmod_idle+0x28/0xd8) from [<c005d210>]
> (omap_hwmod_idle+0x28/0x38)
> [ 0.000000] [<c005d210>] (omap_hwmod_idle+0x28/0x38) from [<c000fd48>]
> (omap_serial_init_port+0x164/0x42c)
> [ 0.000000] [<c000fd48>] (omap_serial_init_port+0x164/0x42c) from
> [<c0010028>] (omap_serial_init+0x18/0x40)
> [ 0.000000] [<c0010028>] (omap_serial_init+0x18/0x40) from [<c0012a44>]
> (omap_2430sdp_init+0x48/0xcc)
> [ 0.000000] [<c0012a44>] (omap_2430sdp_init+0x48/0xcc) from [<c000b650>]
> (customize_machine+0x18/0x24)
> [ 0.000000] [<c000b650>] (customize_machine+0x18/0x24) from [<c004c578>]
> (do_one_initcall+0xcc/0x1a4)
> [ 0.000000] [<c004c578>] (do_one_initcall+0xcc/0x1a4) from [<c00085e0>]
> (kernel_init+0x148/0x210)
> [ 0.000000] [<c00085e0>] (kernel_init+0x148/0x210) from [<c004dcb8>]
> (kernel_thread_exit+0x0/0x8)
> [ 0.000000] ---[ end trace 1b75b31a2719ed1c ]---
> [ 0.000000] ------------[ cut here ]------------
> [ 0.000000] WARNING: at arch/arm/mach-omap2/omap_hwmod.c:1237
> _omap_hwmod_idle+0x28/0xd8()
> [ 0.000000] omap_hwmod: uart3: idle state can only be entered from enabled
> state
> [ 0.000000] Modules linked in:
> [ 0.000000] [<c0053478>] (unwind_backtrace+0x0/0xe4) from [<c00897f4>]
> (warn_slowpath_common+0x4c/0x64)
> [ 0.000000] [<c00897f4>] (warn_slowpath_common+0x4c/0x64) from
> [<c008988c>] (warn_slowpath_fmt+0x2c/0x3c)
> [ 0.000000] [<c008988c>] (warn_slowpath_fmt+0x2c/0x3c) from [<c005d138>]
> (_omap_hwmod_idle+0x28/0xd8)
> [ 0.000000] [<c005d138>] (_omap_hwmod_idle+0x28/0xd8) from [<c0058c48>]
> (uart_idle_hwmod+0x10/0x18)
> [ 0.000000] [<c0058c48>] (uart_idle_hwmod+0x10/0x18) from [<c006a994>]
> (_omap_device_deactivate+0x58/0x144)
> [ 0.000000] [<c006a994>] (_omap_device_deactivate+0x58/0x144) from
> [<c006ac44>] (omap_device_idle+0x48/0x68)
> [ 0.000000] [<c006ac44>] (omap_device_idle+0x48/0x68) from [<c000ff08>]
> (omap_serial_init_port+0x324/0x42c)
> [ 0.000000] [<c000ff08>] (omap_serial_init_port+0x324/0x42c) from
> [<c0010028>] (omap_serial_init+0x18/0x40)
> [ 0.000000] [<c0010028>] (omap_serial_init+0x18/0x40) from [<c0012a44>]
> (omap_2430sdp_init+0x48/0xcc)
> [ 0.000000] [<c0012a44>] (omap_2430sdp_init+0x48/0xcc) from [<c000b650>]
> (customize_machine+0x18/0x24)
> [ 0.000000] [<c000b650>] (customize_machine+0x18/0x24) from [<c004c578>]
> (do_one_initcall+0xcc/0x1a4)
> [ 0.000000] [<c004c578>] (do_one_initcall+0xcc/0x1a4) from [<c00085e0>]
> (kernel_init+0x148/0x210)
> [ 0.000000] [<c00085e0>] (kernel_init+0x148/0x210) from [<c004dcb8>]
> (kernel_thread_exit+0x0/0x8)
> [ 0.000000] ---[ end trace 1b75b31a2719ed1d ]---
>>
>>
>> diff --git a/arch/arm/mach-omap2/cm-regbits-24xx.h
>> b/arch/arm/mach-omap2/cm-regbits-24xx.h
>> index 5986e2b..9a106c0 100644
>> --- a/arch/arm/mach-omap2/cm-regbits-24xx.h
>> +++ b/arch/arm/mach-omap2/cm-regbits-24xx.h
>> @@ -126,12 +126,12 @@
>> #define OMAP24XX_ST_HDQ_MASK (1 << 23)
>> #define OMAP2420_ST_I2C2_SHIFT 20
>> #define OMAP2420_ST_I2C2_MASK (1 << 20)
>> -#define OMAP2430_ST_I2CHS1_SHIFT 20
>> -#define OMAP2430_ST_I2CHS1_MASK (1 << 20)
>> +#define OMAP2430_ST_I2CHS1_SHIFT 19
>> +#define OMAP2430_ST_I2CHS1_MASK (1 << 19)
>> #define OMAP2420_ST_I2C1_SHIFT 19
>> #define OMAP2420_ST_I2C1_MASK (1 << 19)
>> -#define OMAP2430_ST_I2CHS2_SHIFT 19
>> -#define OMAP2430_ST_I2CHS2_MASK (1 << 19)
>> +#define OMAP2430_ST_I2CHS2_SHIFT 20
>> +#define OMAP2430_ST_I2CHS2_MASK (1 << 20)
>> #define OMAP24XX_ST_MCBSP2_SHIFT 16
>> #define OMAP24XX_ST_MCBSP2_MASK (1 << 16)
>> #define OMAP24XX_ST_MCBSP1_SHIFT 15
>> diff --git a/arch/arm/mach-omap2/omap_hwmod_2420_data.c
>> b/arch/arm/mach-omap2/omap_hwmod_2420_data.c
>> index 8bf46c1..ca4edd3 100644
>> --- a/arch/arm/mach-omap2/omap_hwmod_2420_data.c
>> +++ b/arch/arm/mach-omap2/omap_hwmod_2420_data.c
>> @@ -504,6 +504,7 @@ static struct omap_hwmod omap2420_i2c1_hwmod = {
>> .main_clk = "i2c1_fck",
>> .prcm = {
>> .omap2 = {
>> + .module_offs = CORE_MOD,
>> .prcm_reg_id = 1,
>> .module_bit = OMAP2420_EN_I2C1_SHIFT,
>> .idlest_reg_id = 1,
>> @@ -541,6 +542,7 @@ static struct omap_hwmod omap2420_i2c2_hwmod = {
>> .main_clk = "i2c2_fck",
>> .prcm = {
>> .omap2 = {
>> + .module_offs = CORE_MOD,
>> .prcm_reg_id = 1,
>> .module_bit = OMAP2420_EN_I2C2_SHIFT,
>> .idlest_reg_id = 1,
>> diff --git a/arch/arm/mach-omap2/omap_hwmod_2430_data.c
>> b/arch/arm/mach-omap2/omap_hwmod_2430_data.c
>> index 92f4ec0..9498847 100644
>> --- a/arch/arm/mach-omap2/omap_hwmod_2430_data.c
>> +++ b/arch/arm/mach-omap2/omap_hwmod_2430_data.c
>> @@ -502,7 +502,7 @@ static struct omap_hwmod omap2430_i2c1_hwmod = {
>> .mpu_irqs_cnt = ARRAY_SIZE(i2c1_mpu_irqs),
>> .sdma_reqs = i2c1_sdma_reqs,
>> .sdma_reqs_cnt = ARRAY_SIZE(i2c1_sdma_reqs),
>> - .main_clk = "i2c1_fck",
>> + .main_clk = "i2chs1_fck",
>> .prcm = {
>> .omap2 = {
>> /*
>> @@ -513,6 +513,7 @@ static struct omap_hwmod omap2430_i2c1_hwmod = {
>> * additonal flags when clk handling is moved
>> * to hwmod framework.
>> */
>> + .module_offs = CORE_MOD,
>> .prcm_reg_id = 1,
>> .module_bit = OMAP2430_EN_I2CHS1_SHIFT,
>> .idlest_reg_id = 1,
>> @@ -551,9 +552,10 @@ static struct omap_hwmod omap2430_i2c2_hwmod = {
>> .mpu_irqs_cnt = ARRAY_SIZE(i2c2_mpu_irqs),
>> .sdma_reqs = i2c2_sdma_reqs,
>> .sdma_reqs_cnt = ARRAY_SIZE(i2c2_sdma_reqs),
>> - .main_clk = "i2c2_fck",
>> + .main_clk = "i2chs2_fck",
>> .prcm = {
>> .omap2 = {
>> + .module_offs = CORE_MOD,
>> .prcm_reg_id = 1,
>> .module_bit = OMAP2430_EN_I2CHS2_SHIFT,
>> .idlest_reg_id = 1,
>> >
>> > >
>> > > >> Note this also depends on a handful of patches from my pm-backports
>> > > >> branch, most of which you have picked into omap-testing, except for
>> > > >> the
>> > > >> one I just posted to linux-arm-kernel:
>> > > >>
>> > > >> ARM: add cpu_idle_wait() to support CPUidle on SMP systems.
>> > > >>
>> > > >> This one is required now that the default config enables SMP.
>> > > >
>> > > > I'll apply that into omap-testing branch.
>> > >
>> > > Thanks,
>> > >
>> > > Kevin
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
