On Thu, Sep 30, 2010 at 12:19:08AM -0500, Gupta, Ajay Kumar wrote:
AM35x has musb interface and uses CPPI4.1 DMA engine. Current patch supports only PIO mode. DMA support can be added later once basic CPPI4.1 DMA patch is accepted.Also added USB_MUSB_AM35X which is required to differentiate musb ips between OMAP3x and AM35x. This config would be used to for below purposes, - Select am35x.c instead of omap2430.c for compilation at drivers/usb/musb directory. Please note there are significant differneces in these two files as musb ip in quite different on AM35x. - Select workaround codes applicable for AM35x musb issues. one such workaround is for bytewise read issue on AM35x. Signed-off-by: Ajay Kumar Gupta <[email protected]>
this one doesn't apply of top of my musb-2.6.37 branch. patching file drivers/usb/musb/Kconfig Hunk #1 succeeded at 60 with fuzz 2. Hunk #2 FAILED at 158. 1 out of 2 hunks FAILED -- saving rejects to file drivers/usb/musb/Kconfig.rej patching file drivers/usb/musb/Makefile Hunk #1 FAILED at 23. 1 out of 1 hunk FAILED -- saving rejects to file drivers/usb/musb/Makefile.rej patching file drivers/usb/musb/am35x.c patching file drivers/usb/musb/musb_core.h Hunk #1 FAILED at 330. 1 out of 1 hunk FAILED -- saving rejects to file drivers/usb/musb/musb_core.h.rej could you refresh and resend this one ?? -- balbi -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
