From: Paul Walmsley <[email protected]> Use the new functions from SCM layer instead of handling registers directly with __raw_writel, as explained in:
http://marc.info/?l=linux-omap&m=128779652429922&w=2 This fixes the build on 2.6.37 since control.h is not available for drivers any more. Signed-off-by: Paul Walmsley <[email protected]> Signed-off-by: Omar Ramirez Luna <[email protected]> Signed-off-by: Felipe Contreras <[email protected]> --- drivers/staging/tidspbridge/core/tiomap3430.c | 13 ++++++------- 1 files changed, 6 insertions(+), 7 deletions(-) diff --git a/drivers/staging/tidspbridge/core/tiomap3430.c b/drivers/staging/tidspbridge/core/tiomap3430.c index cb38743..84de0c2 100644 --- a/drivers/staging/tidspbridge/core/tiomap3430.c +++ b/drivers/staging/tidspbridge/core/tiomap3430.c @@ -23,7 +23,7 @@ #include <dspbridge/host_os.h> #include <linux/mm.h> #include <linux/mmzone.h> -#include <plat/control.h> +#include <plat/dsp.h> /* ----------------------------------- DSP/BIOS Bridge */ #include <dspbridge/dbdefs.h> @@ -412,19 +412,18 @@ static int bridge_brd_start(struct bridge_dev_context *dev_ctxt, /* Assert RST1 i.e only the RST only for DSP megacell */ if (!status) { + u8 bootmode; (*pdata->dsp_prm_rmw_bits)(OMAP3430_RST1_IVA2_MASK, OMAP3430_RST1_IVA2_MASK, OMAP3430_IVA2_MOD, OMAP2_RM_RSTCTRL); /* Mask address with 1K for compatibility */ - __raw_writel(dsp_addr & OMAP3_IVA2_BOOTADDR_MASK, - OMAP343X_CTRL_REGADDR( - OMAP343X_CONTROL_IVA2_BOOTADDR)); + dsp_addr &= OMAP3_IVA2_BOOTADDR_MASK; + (*pdata->set_dsp_bootaddr)(dsp_addr); /* * Set bootmode to self loop if dsp_debug flag is true */ - __raw_writel((dsp_debug) ? OMAP3_IVA2_BOOTMOD_IDLE : 0, - OMAP343X_CTRL_REGADDR( - OMAP343X_CONTROL_IVA2_BOOTMOD)); + bootmode = dsp_debug ? OMAP_DSP_BOOTMODE_IDLE : 0; + (*pdata->set_dsp_bootmode)(bootmode); } } if (!status) { -- 1.7.3.2.3.gf8529 -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
