"Gopinath, Thara" <[email protected]> writes:
>>>
[...]
>>>
>>>cpu_is_* checks are only acceptable at init time. This one happens
>>>during every scale. These VC settings should be set at init time only.
>>>
>>>Same issue with forceupdate_scale.
>
> These masks are needed only in vc bypass voltage scaling API. I was
> thinking that for using in just one API I need not maintain these
> variables in the generic vdd structure. But yes this will add a
> cpu_is_* check in this API. Is it preferred to have these variables
> defined in the common vdd structures and populated during init even if
> used only in one API?
Yes.
[...]
>>>> +void omap_vp_enable(struct voltagedomain *voltdm)
>>>> +{
>>>> + struct omap_vdd_info *vdd;
>>>> + u32 vpconfig;
>>>> +
>>>> + if (!voltdm || IS_ERR(voltdm)) {
>>>> + pr_warning("%s: VDD specified does not exist!\n", __func__);
>>>> + return;
>>>> + }
>>>> +
>>>> + vdd = container_of(voltdm, struct omap_vdd_info, voltdm);
>>>> +
>>>> + /* If VP is already enabled, do nothing. Return */
>>>> + if (voltage_read_reg(vdd->vp_offs.vpconfig) &
>>>> + vdd->vp_reg.vpconfig_vpenable)
>>>> + return;
>>>
>>>Minor: is a register access here required? Why not just keep an
>>>'vp_enabled' flag as part of the vdd struct?
>
> I do not want to have the complications of maintaining a flag and
> ensuring exclusivity.
Whether you use a flag or a register access, the ability to ensure
exclusivity does not change.
> But do you think having a register read here is bad?
Yes.
s/bad/unnecessary/
> Latency cannot be much as it is a single register read. If you really
> think we should have a flag, I can change it.
The PRCM is on L4, so accesses to PRCM registers are all slow and should
be avoided if possible. This is an easy case where a register access
can be prevented simply by caching.
Kevin
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
