Madhusudhan Gowda <[email protected]> writes:

> A corner case where prcm_interrupt handler is handling the WKST_WKUP and
> before acknowledging the wakeup sources if an IO Pad wakeup ST_IO is
> indicated then hits the below warning since the wakeup sources are already
> cleared.
>       WARN(c == 0, "prcm: WARNING: PRCM indicated "
>               "MPU wakeup but no wakeup sources "
>               "are marked\n");
>
> Since the above warning condition is only valid if the prcm_interrupt
> handler is called but no wakeup sources are marked in first iteration.
>
> The patch fixes this corner case.
>
> Updated after Paul Walmsley's "only handle selected PRCM interrupts" patch.

Can you have a look at the recent work by Thomas Petazzoni:

    [PATCH] omap: prcm: switch to a chained IRQ handler mechanism

where the PRCM IRQ handler is broken up to see if this problem still
exists?  I suspect the problem is gone as each type of interrupt is
separated out, but should be verified.

Kevin

>
> Signed-off-by: Madhusudhan Gowda <[email protected]>
> ---
>  arch/arm/mach-omap2/pm34xx.c |    7 +++++--
>  1 files changed, 5 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
> index 75c0cd1..2ed3662 100644
> --- a/arch/arm/mach-omap2/pm34xx.c
> +++ b/arch/arm/mach-omap2/pm34xx.c
> @@ -266,6 +266,7 @@ static irqreturn_t prcm_interrupt_handler (int irq, void 
> *dev_id)
>  {
>       u32 irqenable_mpu, irqstatus_mpu;
>       int c = 0;
> +     int ct = 0;
>  
>       irqenable_mpu = prm_read_mod_reg(OCP_MOD,
>                                        OMAP3_PRM_IRQENABLE_MPU_OFFSET);
> @@ -277,13 +278,15 @@ static irqreturn_t prcm_interrupt_handler (int irq, 
> void *dev_id)
>               if (irqstatus_mpu & (OMAP3430_WKUP_ST_MASK |
>                                    OMAP3430_IO_ST_MASK)) {
>                       c = _prcm_int_handle_wakeup();
> +                     ct++;
>  
>                       /*
>                        * Is the MPU PRCM interrupt handler racing with the
>                        * IVA2 PRCM interrupt handler ?
>                        */
> -                     WARN(c == 0, "prcm: WARNING: PRCM indicated MPU wakeup "
> -                          "but no wakeup sources are marked\n");
> +                     WARN(!c && (ct == 1), "prcm: WARNING: PRCM indicated "
> +                                     "MPU wakeup but no wakeup sources "
> +                                     "are marked\n");
>               } else {
>                       /* XXX we need to expand our PRCM interrupt handler */
>                       WARN(1, "prcm: WARNING: PRCM interrupt received, but "
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to