Hi Cosmin,
On Sat, 2010-11-20 at 21:51 +0100, Cosmin Cojocar wrote:
> The kgdb invokes the poll_put_char and poll_get_char when communicating
> with the host. This patch also changes the initialization order because the
> kgdb will check at the very beginning, if there is a valid serial
> driver.
>
> Signed-off-by: Cosmin Cojocar <[email protected]>
> ---
> drivers/serial/Makefile | 2 +-
> drivers/serial/omap-serial.c | 38 ++++++++++++++++++++++++++++++++++++--
> 2 files changed, 37 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile
> index c570576..ad86113 100644
> --- a/drivers/serial/Makefile
> +++ b/drivers/serial/Makefile
> @@ -80,6 +80,7 @@ obj-$(CONFIG_SERIAL_NETX) += netx-serial.o
> obj-$(CONFIG_SERIAL_OF_PLATFORM) += of_serial.o
> obj-$(CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL) += nwpserial.o
> obj-$(CONFIG_SERIAL_KS8695) += serial_ks8695.o
> +obj-$(CONFIG_SERIAL_OMAP) += omap-serial.o
> obj-$(CONFIG_KGDB_SERIAL_CONSOLE) += kgdboc.o
> obj-$(CONFIG_SERIAL_QE) += ucc_uart.o
> obj-$(CONFIG_SERIAL_TIMBERDALE) += timbuart.o
> @@ -88,4 +89,3 @@ obj-$(CONFIG_SERIAL_ALTERA_JTAGUART) += altera_jtaguart.o
> obj-$(CONFIG_SERIAL_ALTERA_UART) += altera_uart.o
> obj-$(CONFIG_SERIAL_MRST_MAX3110) += mrst_max3110.o
> obj-$(CONFIG_SERIAL_MFD_HSU) += mfd.o
> -obj-$(CONFIG_SERIAL_OMAP) += omap-serial.o
> diff --git a/drivers/serial/omap-serial.c b/drivers/serial/omap-serial.c
> index 03a96db..df6ba03 100644
> --- a/drivers/serial/omap-serial.c
> +++ b/drivers/serial/omap-serial.c
> @@ -866,14 +866,44 @@ serial_omap_type(struct uart_port *port)
> return up->name;
> }
>
> +#define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE)
> +
> +#ifdef CONFIG_CONSOLE_POLL
> +static void serial_omap_poll_put_char(struct uart_port *port, unsigned char
> ch)
> +{
> + struct uart_omap_port *up = (struct uart_omap_port *)port;
> + unsigned int status;
> +
> + do {
> + status = serial_in(up, UART_LSR);
> + udelay(1);
> + } while ((status & BOTH_EMPTY) != BOTH_EMPTY);
> +
Shouldn't you use wait_for_xmitr() instead? If you do that, then you
don't need to move the BOTH_EMPTY macro anymore.
> + serial_out(up, UART_TX, ch);
> +}
> +
> +static int serial_omap_poll_get_char(struct uart_port *port)
> +{
> + struct uart_omap_port *up = (struct uart_omap_port *)port;
> + unsigned int status;
> + int ch;
> +
> + do {
> + status = serial_in(up, UART_LSR);
> + udelay(1);
> + } while ((status & UART_LSR_DR) != UART_LSR_DR);
> +
I think you should be returning NO_POLL_CHAR if the condition is false,
instead of busy looping.
> + ch = (int)serial_in(up, UART_RX);
> + return ch;
> +}
I don't think you need the extra ch variable. Just return serial_in(up,
UART_RX).
Cheers,
Ionut.
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
