Nishant,

On Wed, Nov 24, 2010 at 10:54 PM, Nishanth Menon <n...@ti.com> wrote:
> Sripathy, Vishwanath had written, on 11/24/2010 10:51 AM, the following:
>>
>> On Fri, Nov 19, 2010 at 7:24 AM, Nishanth Menon <n...@ti.com> wrote:
>>>
>>> From: Peter 'p2' De Schrijver <peter.de-schrij...@nokia.com>
>>>
>>> Errata i581 impacts OMAP3 platforms.
>>> PRCM DPLL control FSM removes SDRC_IDLEREQ before DPLL3 locks causing
>>> the DPLL not to be locked at times.
>>>
>>> IMPORTANT: this is not a complete workaround implementation as
>>> recommended
>>> by the silicon errata. this is a support logic for detecting lockups and
>>> attempting to recover where possible and is known to provide stability
>>> in multiple platforms.
>>
>> How does this WA work when Core enters off mode? SRAM contents are
>> lost when Core enters off. So how this code is copied to SRAM upon
>> wakeup? Where is this code placed when Core entered off mode?
>
> It depends on the location of wait_sdram_ok - ideally speaking yep, you are
> right the current wait_sdram_ok for OFF makes no sense at all as it wakes
> off the ddr. For retention though, it makes sense. after the discussion we
> had on Jean's series http://marc.info/?t=128532555200004&r=1&w=2, I am
> pretty sure that refactor that Jean is doing will help us clean this mess
> up.
Then I do not find any need to keep this code in SRAM as we anyway
know that it does not help when Core enters off mode.
As you know already, in Jean's ASM clean up code, we are moving all
these ASM code to DDR.

Vishwa
>
> Maybe we can refactor this as part of Jean's cleanups.
>
>>
>> Vishwa
>>>
>>> Signed-off-by: Peter 'p2' De Schrijver <peter.de-schrij...@nokia.com>
>>> ---
>>>  arch/arm/mach-omap2/sleep34xx.S |   52
>>> +++++++++++++++++++++++++++++++++++---
>>>  1 files changed, 47 insertions(+), 5 deletions(-)
>>>
>>> diff --git a/arch/arm/mach-omap2/sleep34xx.S
>>> b/arch/arm/mach-omap2/sleep34xx.S
>>> index 8f207b2..5a4468f 100644
>>> --- a/arch/arm/mach-omap2/sleep34xx.S
>>> +++ b/arch/arm/mach-omap2/sleep34xx.S
>>> @@ -42,6 +42,7 @@
>>>                               OMAP3430_PM_PREPWSTST)
>>>  #define PM_PWSTCTRL_MPU_P      OMAP3430_PRM_BASE + MPU_MOD +
>>> OMAP2_PM_PWSTCTRL
>>>  #define CM_IDLEST1_CORE_V      OMAP34XX_CM_REGADDR(CORE_MOD, CM_IDLEST1)
>>> +#define CM_IDLEST_CKGEN_V      OMAP34XX_CM_REGADDR(PLL_MOD, CM_IDLEST)
>>>  #define SRAM_BASE_P            0x40200000
>>>  #define CONTROL_STAT           0x480022F0
>>>  #define SCRATCHPAD_MEM_OFFS    0x310 /* Move this as correct place is
>>> @@ -554,31 +555,67 @@ skip_l2_inval:
>>>
>>>  /* Make sure SDRC accesses are ok */
>>>  wait_sdrc_ok:
>>> +
>>> +/* DPLL3 must be locked before accessing the SDRC. Maybe the HW ensures
>>> this. */
>>> +       ldr     r4, cm_idlest_ckgen
>>> +wait_dpll3_lock:
>>> +       ldr     r5, [r4]
>>> +       tst     r5, #1
>>> +       beq     wait_dpll3_lock
>>> +
>>>        ldr     r4, cm_idlest1_core
>>> +wait_sdrc_ready:
>>>        ldr     r5, [r4]
>>> -        and     r5, r5, #0x2
>>> -        cmp     r5, #0
>>> -        bne     wait_sdrc_ok
>>> +        tst     r5, #0x2
>>> +        bne     wait_sdrc_ready
>>> +       /* allow DLL powerdown upon hw idle req */
>>>        ldr     r4, sdrc_power
>>>        ldr     r5, [r4]
>>>        bic     r5, r5, #0x40
>>>        str     r5, [r4]
>>> -wait_dll_lock:
>>> +is_dll_in_lock_mode:
>>> +
>>>        /* Is dll in lock mode? */
>>>        ldr     r4, sdrc_dlla_ctrl
>>>        ldr     r5, [r4]
>>>        tst     r5, #0x4
>>>        bxne    lr
>>>        /* wait till dll locks */
>>> -        ldr     r4, sdrc_dlla_status
>>> +wait_dll_lock_timed:
>>> +       ldr     r4, wait_dll_lock_counter
>>> +       add     r4, r4, #1
>>> +       str     r4, wait_dll_lock_counter
>>> +       ldr     r4, sdrc_dlla_status
>>> +        mov    r6, #8          /* Wait 20uS for lock */
>>> +wait_dll_lock:
>>> +       subs    r6, r6, #0x1
>>> +       beq     kick_dll
>>>        ldr     r5, [r4]
>>>        and     r5, r5, #0x4
>>>        cmp     r5, #0x4
>>>        bne     wait_dll_lock
>>>        bx      lr
>>>
>>> +       /* disable/reenable DLL if not locked */
>>> +kick_dll:
>>> +       ldr     r4, sdrc_dlla_ctrl
>>> +       ldr     r5, [r4]
>>> +       mov     r6, r5
>>> +       bic     r6, #(1<<3)     /* disable dll */
>>> +       str     r6, [r4]
>>> +       dsb
>>> +       orr     r6, r6, #(1<<3) /* enable dll */
>>> +       str     r6, [r4]
>>> +       dsb
>>> +       ldr     r4, kick_counter
>>> +       add     r4, r4, #1
>>> +       str     r4, kick_counter
>>> +       b       wait_dll_lock_timed
>>> +
>>>  cm_idlest1_core:
>>>       .word   CM_IDLEST1_CORE_V
>>> +cm_idlest_ckgen:
>>> +       .word   CM_IDLEST_CKGEN_V
>>>  sdrc_dlla_status:
>>>       .word   SDRC_DLLA_STATUS_V
>>>  sdrc_dlla_ctrl:
>>> @@ -615,5 +652,10 @@ control_stat:
>>>       .word   CONTROL_STAT
>>>  kernel_flush:
>>>       .word v7_flush_dcache_all
>>> +       /* these 2 words need to be at the end !!! */
>>> +kick_counter:
>>> +       .word   0
>>> +wait_dll_lock_counter:
>>> +       .word   0
>>>  ENTRY(omap34xx_cpu_suspend_sz)
>>>       .word   . - omap34xx_cpu_suspend
>>> --
>>> 1.6.3.3
>>>
>>>
>
>
> --
> Regards,
> Nishanth Menon
>
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to