From: Senthilvadivu Guruswamy <svad...@ti.com>
Move init exit methods to its driver probe,remove.
pdev member has to be maintained by its own drivers.
Replace printk with dev_dbg for boot time optimize
Signed-off-by: Senthilvadivu Guruswamy <svad...@ti.com>
---
drivers/video/omap2/dss/core.c | 9 ----
drivers/video/omap2/dss/rfbi.c | 80 ++++++++++++++++++----------------------
2 files changed, 36 insertions(+), 53 deletions(-)
diff --git a/drivers/video/omap2/dss/core.c b/drivers/video/omap2/dss/core.c
index 5b0f551..edb025c 100644
--- a/drivers/video/omap2/dss/core.c
+++ b/drivers/video/omap2/dss/core.c
@@ -192,12 +192,6 @@ static int omap_dss_probe(struct platform_device *pdev)
dss_clk_enable(DSS_CLK_ICK | DSS_CLK_FCK1 | DSS_CLK_54M);
- r = rfbi_init();
- if (r) {
- DSSERR("Failed to initialize rfbi\n");
- goto err_rfbi;
- }
-
r = dpi_init(pdev);
if (r) {
DSSERR("Failed to initialize dpi\n");
@@ -271,8 +265,6 @@ err_venc:
err_dispc:
dpi_exit();
err_dpi:
- rfbi_exit();
-err_rfbi:
return r;
}
@@ -287,7 +279,6 @@ static int omap_dss_remove(struct platform_device *pdev)
venc_exit();
dispc_exit();
dpi_exit();
- rfbi_exit();
if (cpu_is_omap34xx()) {
dsi_exit();
sdi_exit();
diff --git a/drivers/video/omap2/dss/rfbi.c b/drivers/video/omap2/dss/rfbi.c
index a086233..fde8893 100644
--- a/drivers/video/omap2/dss/rfbi.c
+++ b/drivers/video/omap2/dss/rfbi.c
@@ -100,6 +100,7 @@ static int rfbi_convert_timings(struct rfbi_timings *t);
static void rfbi_get_clk_info(u32 *clk_period, u32 *max_clk_div);
static struct {
+ struct platform_device *pdev;
void __iomem *base;
unsigned long l4_khz;
@@ -957,50 +958,6 @@ void rfbi_dump_regs(struct seq_file *s)
#undef DUMPREG
}
-int rfbi_init(void)
-{
- u32 rev;
- u32 l;
-
- spin_lock_init(&rfbi.cmd_lock);
-
- init_completion(&rfbi.cmd_done);
- atomic_set(&rfbi.cmd_fifo_full, 0);
- atomic_set(&rfbi.cmd_pending, 0);
-
- rfbi.base = ioremap(RFBI_BASE, SZ_256);
- if (!rfbi.base) {
- DSSERR("can't ioremap RFBI\n");
- return -ENOMEM;
- }
-
- rfbi_enable_clocks(1);
-
- msleep(10);
-
- rfbi.l4_khz = dss_clk_get_rate(DSS_CLK_ICK) / 1000;
-
- /* Enable autoidle and smart-idle */
- l = rfbi_read_reg(RFBI_SYSCONFIG);
- l |= (1 << 0) | (2 << 3);
- rfbi_write_reg(RFBI_SYSCONFIG, l);
-
- rev = rfbi_read_reg(RFBI_REVISION);
- printk(KERN_INFO "OMAP RFBI rev %d.%d\n",
- FLD_GET(rev, 7, 4), FLD_GET(rev, 3, 0));
-
- rfbi_enable_clocks(0);
-
- return 0;
-}
-
-void rfbi_exit(void)
-{
- DSSDBG("rfbi_exit\n");
-
- iounmap(rfbi.base);
-}
-
int omapdss_rfbi_display_enable(struct omap_dss_device *dssdev)
{
int r;
@@ -1058,11 +1015,46 @@ int rfbi_init_display(struct omap_dss_device *dssdev)
/* RFBI HW IP initialisation */
static int omap_rfbihw_probe(struct platform_device *pdev)
{
+ u32 rev;
+ u32 l;
+
+ rfbi.pdev = pdev;
+
+ spin_lock_init(&rfbi.cmd_lock);
+
+ init_completion(&rfbi.cmd_done);
+ atomic_set(&rfbi.cmd_fifo_full, 0);
+ atomic_set(&rfbi.cmd_pending, 0);
+
+ rfbi.base = ioremap(RFBI_BASE, SZ_256);
+ if (!rfbi.base) {
+ DSSERR("can't ioremap RFBI\n");
+ return -ENOMEM;
+ }
+
+ rfbi_enable_clocks(1);
+
+ msleep(10);
+
+ rfbi.l4_khz = dss_clk_get_rate(DSS_CLK_ICK) / 1000;
+
+ /* Enable autoidle and smart-idle */
+ l = rfbi_read_reg(RFBI_SYSCONFIG);
+ l |= (1 << 0) | (2 << 3);
+ rfbi_write_reg(RFBI_SYSCONFIG, l);
+
+ rev = rfbi_read_reg(RFBI_REVISION);
+ dev_dbg(&pdev->dev, "OMAP RFBI rev %d.%d\n",
+ FLD_GET(rev, 7, 4), FLD_GET(rev, 3, 0));
+
+ rfbi_enable_clocks(0);
+
return 0;
}
static int omap_rfbihw_remove(struct platform_device *pdev)
{
+ iounmap(rfbi.base);
return 0;
}
--
1.6.3.3
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
