From: Peter 'p2' De Schrijver <peter.de-schrij...@nokia.com> This disables L2 cache before invalidating it and reenables it afterwards. This is be done according to ARM documentation. Currently this is identified as being needed on OMAP3630 as the disable/enable is done from "public side" while, on OMAP3430, this is done in the "secure side".
[...@ti.com: ported to 2.6.37-rc2, added hooks to enable the logic only on 3630] Signed-off-by: Nishanth Menon <n...@ti.com> Signed-off-by: Eduardo Valentin <eduardo.valen...@nokia.com> Signed-off-by: Peter 'p2' De Schrijver <peter.de-schrij...@nokia.com> --- v2: rebased out to this series independent of HS bugfixes v1: http://marc.info/?l=linux-omap&m=129013171125204&w=2 arch/arm/mach-omap2/pm.h | 6 ++++++ arch/arm/mach-omap2/pm34xx.c | 3 +++ arch/arm/mach-omap2/sleep34xx.S | 30 ++++++++++++++++++++++++++++++ 3 files changed, 39 insertions(+), 0 deletions(-) diff --git a/arch/arm/mach-omap2/pm.h b/arch/arm/mach-omap2/pm.h index 0d75bfd..aff39d0 100644 --- a/arch/arm/mach-omap2/pm.h +++ b/arch/arm/mach-omap2/pm.h @@ -85,4 +85,10 @@ extern unsigned int save_secure_ram_context_sz; extern unsigned int omap24xx_cpu_suspend_sz; extern unsigned int omap34xx_cpu_suspend_sz; +#if defined(CONFIG_PM) +extern void enable_omap3630_toggle_l2_on_restore(void); +#else +static inline void enable_omap3630_toggle_l2_on_restore(void) { } +#endif + #endif diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index bd426cc..e0ade5f 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -988,6 +988,9 @@ static void pm_errata_configure(void) if (cpu_is_omap34xx()) { if (cpu_is_omap3630()) pm34xx_errata |= RTA_ERRATUM_i608; + /* Enable the l2 cache toggling in sleep logic */ + if (cpu_is_omap3630()) + enable_omap3630_toggle_l2_on_restore(); } } diff --git a/arch/arm/mach-omap2/sleep34xx.S b/arch/arm/mach-omap2/sleep34xx.S index cc3507b..d2eda01 100644 --- a/arch/arm/mach-omap2/sleep34xx.S +++ b/arch/arm/mach-omap2/sleep34xx.S @@ -111,6 +111,19 @@ ENTRY(get_omap3630_restore_pointer_sz) .word . - get_omap3630_restore_pointer .text +/* + * L2 cache needs to be toggled for stable OFF mode functionality on 3630. + * This function sets up a fflag that will allow for this toggling to take + * place on 3630. Hopefully some version in the future maynot need this + */ +ENTRY(enable_omap3630_toggle_l2_on_restore) + stmfd sp!, {lr} @ save registers on stack + /* Setup so that we will disable and enable l2 */ + mov r1, #0x1 + str r1, l2dis_3630 + ldmfd sp!, {pc} @ restore regs and return + + .text /* Function call to get the restore pointer for for ES3 to resume from OFF */ ENTRY(get_es3_restore_pointer) stmfd sp!, {lr} @ save registers on stack @@ -283,6 +296,14 @@ restore: moveq r9, #0x3 @ MPU OFF => L1 and L2 lost movne r9, #0x1 @ Only L1 and L2 lost => avoid L2 invalidation bne logic_l1_restore + + ldr r0, l2dis_3630 + cmp r0, #0x1 @ should we disable L2 on 3630? + bne skipl2dis + mrc p15, 0, r0, c1, c0, 1 + bic r0, r0, #2 @ disable L2 cache + mcr p15, 0, r0, c1, c0, 1 +skipl2dis: ldr r0, control_stat ldr r1, [r0] and r1, #0x700 @@ -343,6 +364,13 @@ smi: .word 0xE1600070 @ Call SMI monitor (smieq) mov r12, #0x2 .word 0xE1600070 @ Call SMI monitor (smieq) logic_l1_restore: + ldr r1, l2dis_3630 + cmp r1, #0x1 @ Do we need to re-enable L2 on 3630? + bne skipl2reen + mrc p15, 0, r1, c1, c0, 1 + orr r1, r1, #2 @ re-enable L2 cache + mcr p15, 0, r1, c1, c0, 1 +skipl2reen: mov r1, #0 /* Invalidate all instruction caches to PoU * and flush branch target cache */ @@ -678,6 +706,8 @@ control_mem_rta: .word CONTROL_MEM_RTA_CTRL kernel_flush: .word v7_flush_dcache_all +l2dis_3630: + .word 0 /* these 2 words need to be at the end !!! */ kick_counter: .word 0 -- 1.6.3.3 -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
