On Fri, Dec 3, 2010 at 4:38 PM, Santosh Shilimkar <[email protected]> wrote: >> -----Original Message----- >> From: Paul Walmsley [mailto:[email protected]] >> Sent: Friday, December 03, 2010 3:53 PM >> To: Santosh Shilimkar >> Cc: [email protected]; Govindraj; [email protected] >> Subject: RE: Unbalanced IRQ wake disable during resume from static > suspend >> >> Hello Santosh >> >> On Thu, 2 Dec 2010, Santosh Shilimkar wrote: >> >> > Just a wild guess here but is this because the 'set_wake' is >> > not setup and then fw might be returning some error whenever >> > driver invoke this API as part of enable_irq_wake() callback >> > >> > If that being the case, below patch might might help. Can >> > somebody try this out ? >> >> This patch might remove the warnings, but I doubt that it solves the > root >> cause. In any case, it doesn't seem correct to unconditionally return 0 >> (success) from an omap_irq_wake() function, given that the OMAP INTC has >> no functionality in this regard. >> >> The real problem appears to be in drivers/serial/serial_core.c. >> uart_suspend_port() doesn't check the return value of enable_irq_wake(). >> Seems to me that it needs to save that return value somewhere and not >> bother calling disable_irq_wake() in uart_resume_port() if >> enable_irq_wake() returned an error. >> >> That's the patch that I'd suggest that you guys put together and send to >> the Linux serial people. >> > You are right Paul. This will actually fix the broken driver rather than > masking it. Will spin a patch for the same >
Hi Santosh/Paul, How about this patch? [Tested on 3630SDP --- Regards, Govindraj.R >From cb4e79a645b530f83f55d801ab054cc438ada0dd Mon Sep 17 00:00:00 2001 From: Govindraj.R <[email protected]> Date: Fri, 3 Dec 2010 16:42:14 +0530 Subject: [PATCH] Serial: Unbalanced IRQ wake disable during resume from static suspend Check for return status for enable_irq_wake if irq_wake interface is not available then during resume unconditional disabling of irq_wake can throw below warning. ------------[ cut here ]------------ WARNING: at kernel/irq/manage.c:382 set_irq_wake+0x80/0xe4() Unbalanced IRQ 72 wake disable Modules linked in: [<c0062a28>] (unwind_backtrace+0x0/0xec) from [<c0092260>] (warn_slowpath_common+0x4c/0x64) [<c0092260>] (warn_slowpath_common+0x4c/0x64) from [<c00922f8>] (warn_slowpath_fmt+0x2c/0x3c [<c00922f8>] (warn_slowpath_fmt+0x2c/0x3c) from [<c00d3238>] (set_irq_wake+0x80/0xe4) [<c00d3238>] (set_irq_wake+0x80/0xe4) from [<c029dd60>] (uart_resume_port+0x84/0x248) [<c029dd60>] (uart_resume_port+0x84/0x248) from [<c02a2338>] (serial_omap_resume+0x20/0x2c) [<c02a2338>] (serial_omap_resume+0x20/0x2c) from [<c02a92d4>] (platform_pm_resume+0x48/0x54) [<c02a92d4>] (platform_pm_resume+0x48/0x54) from [<c02abd1c>] (pm_op+0x6c/0xac) [<c02abd1c>] (pm_op+0x6c/0xac) from [<c02ac0fc>] (device_resume+0x58/0x10c) [<c02ac0fc>] (device_resume+0x58/0x10c) from [<c02ac2ec>] (dpm_resume_end+0xf4/0x360) [<c02ac2ec>] (dpm_resume_end+0xf4/0x360) from [<c00cf58c>] (suspend_devices_and_enter+0x1ac/0x200) [<c00cf58c>] (suspend_devices_and_enter+0x1ac/0x200) from [<c00cf6c0>] (enter_state+0xe0/0x138) [<c00cf6c0>] (enter_state+0xe0/0x138) from [<c00ced18>] (state_store+0x90/0xb8) [<c00ced18>] (state_store+0x90/0xb8) from [<c0243b98>] (kobj_attr_store+0x18/0x1c) [<c0243b98>] (kobj_attr_store+0x18/0x1c) from [<c0176128>] (sysfs_write_file+0x10c/0x144) [<c0176128>] (sysfs_write_file+0x10c/0x144) from [<c0125528>] (vfs_write+0xac/0x134) [<c0125528>] (vfs_write+0xac/0x134) from [<c012565c>] (sys_write+0x3c/0x68) [<c012565c>] (sys_write+0x3c/0x68) from [<c005bb00>] (ret_fast_syscall+0x0/0x3c) ---[ end trace 19fe50b7b47ba94f ]--- Thus add a flag to check the return status for irq_wake based on flag disable the irq_wake Signed-off-by: Govindraj.R <[email protected]> --- drivers/serial/serial_core.c | 6 ++++-- include/linux/serial_core.h | 1 + 2 files changed, 5 insertions(+), 2 deletions(-) diff --git a/drivers/serial/serial_core.c b/drivers/serial/serial_core.c index cd85112..0466815 100644 --- a/drivers/serial/serial_core.c +++ b/drivers/serial/serial_core.c @@ -1990,7 +1990,8 @@ int uart_suspend_port(struct uart_driver *drv, struct uart_port *uport) tty_dev = device_find_child(uport->dev, &match, serial_match_port); if (device_may_wakeup(tty_dev)) { - enable_irq_wake(uport->irq); + if (!enable_irq_wake(uport->irq)) + uport->irq_wake = 1; put_device(tty_dev); mutex_unlock(&port->mutex); return 0; @@ -2056,7 +2057,8 @@ int uart_resume_port(struct uart_driver *drv, struct uart_port *uport) tty_dev = device_find_child(uport->dev, &match, serial_match_port); if (!uport->suspended && device_may_wakeup(tty_dev)) { - disable_irq_wake(uport->irq); + if (uport->irq_wake) + disable_irq_wake(uport->irq); mutex_unlock(&port->mutex); return 0; } diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h index 295e898..88e73c3 100644 --- a/include/linux/serial_core.h +++ b/include/linux/serial_core.h @@ -359,6 +359,7 @@ struct uart_port { struct device *dev; /* parent device */ unsigned char hub6; /* this should be in the 8250 driver */ unsigned char suspended; + unsigned char irq_wake; /* Irq_wakeup Available */ unsigned char unused[2]; void *private_data; /* generic platform data pointer */ }; -- 1.7.1 -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
