Hi All,
In order to enforce a little bit of consistency in the omap devices name,
the convention for omap devices name will be now omap_xxx. All the drivers
adapted to hwmod will be named like that during the on-going adaptations.
The I2C and UART drivers are already adapted to hwmod but with
the originals name.
Rename i2c and uart using this convention:
i2c_omap -> omap_i2c
omap-hsuart -> omap_uart
Tested on OMAP4 ES2 on Panda / sdp4430. Some more validation will be needed on
OMAP2 & 3.
This series is based on Kevin's pm-hwmod-i2c branch and is available here:
git://gitorious.org/omap-pm/linux.git for_2.6.38/device_name
Regards,
Benoit
v1
http://www.spinics.net/lists/linux-omap/msg41474.html
Merge previous patch #1 and #2 as suggested by Kevin to change the driver
name
at the same time with the device name in the clockdev.
Benoit Cousson (2):
I2C: i2c-omap: Change device name: i2c_omap -> omap_i2c
OMAP: serial: Change device name: omap-hsuart -> omap_uart
arch/arm/mach-omap1/clock_data.c | 6 +++---
arch/arm/mach-omap2/clock2420_data.c | 8 ++++----
arch/arm/mach-omap2/clock2430_data.c | 8 ++++----
arch/arm/mach-omap2/clock3xxx_data.c | 12 ++++++------
arch/arm/mach-omap2/clock44xx_data.c | 16 ++++++++--------
arch/arm/plat-omap/i2c.c | 2 +-
arch/arm/plat-omap/include/plat/omap-serial.h | 2 +-
drivers/i2c/busses/i2c-omap.c | 4 ++--
8 files changed, 29 insertions(+), 29 deletions(-)
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
