Benoit Cousson <b-cous...@ti.com> writes: > Hi All, > > In order to enforce a little bit of consistency in the omap devices name, > the convention for omap devices name will be now omap_xxx. All the drivers > adapted to hwmod will be named like that during the on-going adaptations. > > The I2C and UART drivers are already adapted to hwmod but with > the originals name. > > Rename i2c and uart using this convention: > i2c_omap -> omap_i2c > omap-hsuart -> omap_uart > > Tested on OMAP4 ES2 on Panda / sdp4430. Some more validation will be needed > on OMAP2 & 3. > > This series is based on Kevin's pm-hwmod-i2c branch and is available here: > git://gitorious.org/omap-pm/linux.git for_2.6.38/device_name
Acked-by: Kevin Hilman <khil...@deeprootsystems.com> > Regards, > Benoit > > > v1 > http://www.spinics.net/lists/linux-omap/msg41474.html > > Merge previous patch #1 and #2 as suggested by Kevin to change the driver > name > at the same time with the device name in the clockdev. > > > Benoit Cousson (2): > I2C: i2c-omap: Change device name: i2c_omap -> omap_i2c > OMAP: serial: Change device name: omap-hsuart -> omap_uart > > arch/arm/mach-omap1/clock_data.c | 6 +++--- > arch/arm/mach-omap2/clock2420_data.c | 8 ++++---- > arch/arm/mach-omap2/clock2430_data.c | 8 ++++---- > arch/arm/mach-omap2/clock3xxx_data.c | 12 ++++++------ > arch/arm/mach-omap2/clock44xx_data.c | 16 ++++++++-------- > arch/arm/plat-omap/i2c.c | 2 +- > arch/arm/plat-omap/include/plat/omap-serial.h | 2 +- > drivers/i2c/busses/i2c-omap.c | 4 ++-- > 8 files changed, 29 insertions(+), 29 deletions(-) -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
