From: Rajendra Nayak <[email protected]> The CORE and PER M3 post dividers are different from the rest of the DPLL post dividers as in they go to SCRM, and are used there to export clocks for instance used by external sensor.
There is no automatic HW dependency in PRCM to manage them. Hence these two clocks (dpll post dividers) should be managed by SW and explicitly enabled/disabled. Add control in clock framework to handle that. Signed-off-by: Rajendra Nayak <[email protected]> Signed-off-by: Benoit Cousson <[email protected]> Cc: Paul Walmsley <[email protected]> --- arch/arm/mach-omap2/clock44xx_data.c | 8 ++++++-- 1 files changed, 6 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-omap2/clock44xx_data.c b/arch/arm/mach-omap2/clock44xx_data.c index fd7efe8..51f28a0 100644 --- a/arch/arm/mach-omap2/clock44xx_data.c +++ b/arch/arm/mach-omap2/clock44xx_data.c @@ -610,7 +610,9 @@ static struct clk dpll_core_m3x2_ck = { .clksel = dpll_core_m6x2_div, .clksel_reg = OMAP4430_CM_DIV_M3_DPLL_CORE, .clksel_mask = OMAP4430_DPLL_CLKOUTHIF_DIV_MASK, - .ops = &clkops_null, + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM_DIV_M3_DPLL_CORE, + .enable_bit = OMAP4430_DPLL_CLKOUTHIF_GATE_CTRL_SHIFT, .recalc = &omap2_clksel_recalc, .round_rate = &omap2_clksel_round_rate, .set_rate = &omap2_clksel_set_rate, @@ -869,7 +871,9 @@ static struct clk dpll_per_m3x2_ck = { .clksel = dpll_per_m2x2_div, .clksel_reg = OMAP4430_CM_DIV_M3_DPLL_PER, .clksel_mask = OMAP4430_DPLL_CLKOUTHIF_DIV_MASK, - .ops = &clkops_null, + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM_DIV_M3_DPLL_PER, + .enable_bit = OMAP4430_DPLL_CLKOUTHIF_GATE_CTRL_SHIFT, .recalc = &omap2_clksel_recalc, .round_rate = &omap2_clksel_round_rate, .set_rate = &omap2_clksel_set_rate, -- 1.7.0.4 -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
