"Cousson, Benoit" <b-cous...@ti.com> writes:
> Salut Kevin,
>
> On 12/9/2010 8:18 PM, Kevin Hilman wrote:
>> Hi Charu,
>>
>> "Varadarajan, Charulatha"<ch...@ti.com> writes:
>>
>>> Prepare for implementing GPIO as a platform driver.
>>>
>>> Modifies omap_gpio_init() to make use of omap_gpio_chip_init()
>>> and omap_gpio_mod_init(). omap_gpio_mod_init() does the module init
>>> by clearing the status register and initializing the GPIO control register.
>>> omap_gpio_chip_init() initializes the chip request, free, get, set and
>>> other function pointers and sets the gpio irq handler.
>>>
>>> This is only to reorganize the code so that the "omap gpio platform driver
>>> implementation patch" looks cleaner and better to review.
>>>
>>> Signed-off-by: Charulatha V<ch...@ti.com>
>>
>> I just noticed while testing on 36xx/Zoom3 that GPIO wakeups are no
>> longer working after this series.
>>
>> The problem seems to be that for OMAP2+, this series removed manual
>> SYSCONFIG register setting in favor of using omap_hwmod (which is good),
>> however some of the SYSCONFIG values, specifically, in the current code,
>> the ENAWAKEUP bit was set in each bank, but this is no longer the
>> default with omap_hwmod.
>
> That part is strange, because Rajendra did a patch to enable the
> wakeup bit during _omap_hwmod_enable as soon as the idlemode is set to
> smartidle.
>
> /* If slave port is in SMARTIDLE, also enable wakeup */
> if ((sf & SYSC_HAS_SIDLEMODE) && (s_idlemode == HWMOD_IDLEMODE_SMART))
> _enable_wakeup(oh);
>
> The _disable_wakeup is never called, so in theory once it is set, it
> should remain enabled.
>
> Does that mean that this the GPIO is not in smartidle anymore in your case?
Looks like a bug in the patch that added automatic wakeup enables.
Basically, wakeups are enabled, but are promptly disabled if
SYSC_HAS_AUTOIDLE. Here's the code:
/*
* XXX The clock framework should handle this, by
* calling into this code. But this must wait until the
* clock structures are tagged with omap_hwmod entries
*/
if ((oh->flags & HWMOD_SET_DEFAULT_CLOCKACT) &&
(sf & SYSC_HAS_CLOCKACTIVITY))
_set_clockactivity(oh, oh->class->sysc->clockact, &v);
_write_sysconfig(v, oh);
OK, so here, 'v' has wakeups disabled.
/* If slave is in SMARTIDLE, also enable wakeup */
if ((sf & SYSC_HAS_SIDLEMODE) && !(oh->flags & HWMOD_SWSUP_SIDLE))
_enable_wakeup(oh);
Here we enabled them directly in SYSC (but 'v' is not updated)
/*
* Set the autoidle bit only after setting the smartidle bit
* Setting this will not have any impact on the other modules.
*/
if (sf & SYSC_HAS_AUTOIDLE) {
idlemode = (oh->flags & HWMOD_NO_OCP_AUTOIDLE) ?
0 : 1;
_set_module_autoidle(oh, idlemode, &v);
_write_sysconfig(v, oh);
}
And here, SYSCONFIG is updated again using 'v', which does not have
wakeups enabled.
A quick patch (below) shows that if I update 'v' after enabling wakeups,
the problem is fixed.
I'll cook up a cleaner patch for this, but I think the solution is
probably to change _enable_wakeup() to take the 'v' argument and modify
it instead of directly writing SYSCONFIG. That will make it more like
all the other helper functions.
Kevin
diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
index 12856eb..adcb1fc 100644
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -791,8 +791,10 @@ static void _enable_sysc(struct omap_hwmod *oh)
_write_sysconfig(v, oh);
/* If slave is in SMARTIDLE, also enable wakeup */
- if ((sf & SYSC_HAS_SIDLEMODE) && !(oh->flags & HWMOD_SWSUP_SIDLE))
+ if ((sf & SYSC_HAS_SIDLEMODE) && !(oh->flags & HWMOD_SWSUP_SIDLE)) {
_enable_wakeup(oh);
+ v = oh->_sysc_cache;
+ }
/*
* Set the autoidle bit only after setting the smartidle bit
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
