Using omap_device_build API instead of platform_device_register for 
OMAP2430,OMAP34xx and OMAP4430 musb device registration.
The device specific resources defined in centralized
database will be used. 

Signed-off-by: Hema HK <[email protected]>
Cc: Felipe Balbi <[email protected]>
Cc: Tony Lindgren <[email protected]>
Cc: Kevin Hilman <[email protected]>
Cc: Cousson, Benoit <[email protected]>
Cc: Paul Walmsley <[email protected]>
---
 arch/arm/mach-omap2/usb-musb.c |   76 +++++++++++++++++++++++++++++------------
 1 file changed, 55 insertions(+), 21 deletions(-)

Index: usb/arch/arm/mach-omap2/usb-musb.c
===================================================================
--- usb.orig/arch/arm/mach-omap2/usb-musb.c
+++ usb/arch/arm/mach-omap2/usb-musb.c
@@ -31,9 +31,12 @@
 #include <mach/am35xx.h>
 #include <plat/usb.h>
 #include "control.h"
+#include <plat/omap_device.h>
 
 #if defined(CONFIG_USB_MUSB_OMAP2PLUS) || defined (CONFIG_USB_MUSB_AM35X)
 
+static const char name[] = "musb-omap2430";
+
 static void am35x_musb_reset(void)
 {
        u32     regval;
@@ -170,7 +173,7 @@ static struct musb_hdrc_platform_data mu
 static u64 musb_dmamask = DMA_BIT_MASK(32);
 
 static struct platform_device musb_device = {
-       .name           = "musb-omap2430",
+       .name           = "musb-am35x",
        .id             = -1,
        .dev = {
                .dma_mask               = &musb_dmamask,
@@ -181,26 +184,23 @@ static struct platform_device musb_devic
        .resource       = musb_resources,
 };
 
+static struct omap_device_pm_latency omap_musb_latency[] = {
+       {
+               .deactivate_func = omap_device_idle_hwmods,
+               .activate_func   = omap_device_enable_hwmods,
+               .flags = OMAP_DEVICE_LATENCY_AUTO_ADJUST,
+       },
+};
+
 void __init usb_musb_init(struct omap_musb_board_data *board_data)
 {
-       if (cpu_is_omap243x()) {
-               musb_resources[0].start = OMAP243X_HS_BASE;
-       } else if (cpu_is_omap3517() || cpu_is_omap3505()) {
-               musb_device.name = "musb-am35x";
-               musb_resources[0].start = AM35XX_IPSS_USBOTGSS_BASE;
-               musb_resources[1].start = INT_35XX_USBOTG_IRQ;
-               board_data->set_phy_power = am35x_musb_phy_power;
-               board_data->clear_irq = am35x_musb_clear_irq;
-               board_data->set_mode = am35x_musb_set_mode;
-               board_data->reset = am35x_musb_reset;
-       } else if (cpu_is_omap34xx()) {
-               musb_resources[0].start = OMAP34XX_HSUSB_OTG_BASE;
-       } else if (cpu_is_omap44xx()) {
-               musb_resources[0].start = OMAP44XX_HSUSB_OTG_BASE;
-               musb_resources[1].start = OMAP44XX_IRQ_HS_USB_MC_N;
-               musb_resources[2].start = OMAP44XX_IRQ_HS_USB_DMA_N;
-       }
-       musb_resources[0].end = musb_resources[0].start + SZ_4K - 1;
+       struct omap_hwmod *oh;
+       struct omap_device *od;
+       struct platform_device *pdev;
+       struct device   *dev;
+       int bus_id = -1;
+       const char *oh_name = "usb_otg_hs";
+       struct musb_hdrc_platform_data *pdata;
 
        /*
         * REVISIT: This line can be removed once all the platforms using
@@ -212,8 +212,42 @@ void __init usb_musb_init(struct omap_mu
        musb_plat.mode = board_data->mode;
        musb_plat.extvbus = board_data->extvbus;
 
-       if (platform_device_register(&musb_device) < 0)
-               printk(KERN_ERR "Unable to register HS-USB (MUSB) device\n");
+       if (cpu_is_omap3517() || cpu_is_omap3505()) {
+               musb_resources[0].start = AM35XX_IPSS_USBOTGSS_BASE;
+               musb_resources[1].start = INT_35XX_USBOTG_IRQ;
+               board_data->set_phy_power = am35x_musb_phy_power;
+               board_data->clear_irq = am35x_musb_clear_irq;
+               board_data->set_mode = am35x_musb_set_mode;
+               board_data->reset = am35x_musb_reset;
+               musb_resources[0].end = musb_resources[0].start + SZ_4K - 1;
+
+               if (platform_device_register(&musb_device) < 0)
+                       printk(KERN_ERR "Unable to register HS-USB \
+                                       (MUSB) device\n");
+       } else {
+               oh = omap_hwmod_lookup(oh_name);
+               if (!oh) {
+                       pr_err("Could not look up %s\n", oh_name);
+                       return;
+               }
+
+               pdata = &musb_plat;
+               od = omap_device_build(name, bus_id, oh, pdata,
+                                      sizeof(*pdata), omap_musb_latency,
+                                      ARRAY_SIZE(omap_musb_latency), false);
+               if (IS_ERR(od)) {
+                       pr_err("Could not build omap_device for %s %s\n",
+                                                       name, oh_name);
+                       return;
+               }
+
+               pdev = &od->pdev;
+               dev = &pdev->dev;
+               get_device(dev);
+               dev->dma_mask = &musb_dmamask;
+               dev->coherent_dma_mask = musb_dmamask;
+               put_device(dev);
+       }
 }
 
 #else
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to