gpio_direction_output() has a value argument, there's no need to call
gpio_set_value() explicitly right after.

Signed-off-by: Laurent Pinchart <laurent.pinch...@ideasonboard.com>
---
 arch/arm/mach-omap2/board-igep0020.c |   20 ++++++++------------
 1 files changed, 8 insertions(+), 12 deletions(-)

diff --git a/arch/arm/mach-omap2/board-igep0020.c 
b/arch/arm/mach-omap2/board-igep0020.c
index 5e035a5..20b88c1 100644
--- a/arch/arm/mach-omap2/board-igep0020.c
+++ b/arch/arm/mach-omap2/board-igep0020.c
@@ -342,24 +342,21 @@ static void __init igep2_leds_init(void)
 static inline void igep2_leds_init(void)
 {
        if ((gpio_request(IGEP2_GPIO_LED0_RED, "gpio-led:red:d0") == 0) &&
-           (gpio_direction_output(IGEP2_GPIO_LED0_RED, 1) == 0)) {
+           (gpio_direction_output(IGEP2_GPIO_LED0_RED, 0) == 0))
                gpio_export(IGEP2_GPIO_LED0_RED, 0);
-               gpio_set_value(IGEP2_GPIO_LED0_RED, 0);
-       } else
+       else
                pr_warning("IGEP v2: Could not obtain gpio GPIO_LED0_RED\n");
 
        if ((gpio_request(IGEP2_GPIO_LED0_GREEN, "gpio-led:green:d0") == 0) &&
-           (gpio_direction_output(IGEP2_GPIO_LED0_GREEN, 1) == 0)) {
+           (gpio_direction_output(IGEP2_GPIO_LED0_GREEN, 0) == 0))
                gpio_export(IGEP2_GPIO_LED0_GREEN, 0);
-               gpio_set_value(IGEP2_GPIO_LED0_GREEN, 0);
-       } else
+       else
                pr_warning("IGEP v2: Could not obtain gpio GPIO_LED0_GREEN\n");
 
        if ((gpio_request(IGEP2_GPIO_LED1_RED, "gpio-led:red:d1") == 0) &&
-           (gpio_direction_output(IGEP2_GPIO_LED1_RED, 1) == 0)) {
+           (gpio_direction_output(IGEP2_GPIO_LED1_RED, 0) == 0))
                gpio_export(IGEP2_GPIO_LED1_RED, 0);
-               gpio_set_value(IGEP2_GPIO_LED1_RED, 0);
-       } else
+       else
                pr_warning("IGEP v2: Could not obtain gpio GPIO_LED1_RED\n");
 
 }
@@ -397,10 +394,9 @@ static int igep2_twl_gpio_setup(struct device *dev,
        /* TWL4030_GPIO_MAX + 1 == ledB (out, active low LED) */
 #if !defined(CONFIG_LEDS_GPIO) && !defined(CONFIG_LEDS_GPIO_MODULE)
        if ((gpio_request(gpio+TWL4030_GPIO_MAX+1, "gpio-led:green:d1") == 0)
-           && (gpio_direction_output(gpio + TWL4030_GPIO_MAX + 1, 1) == 0)) {
+           && (gpio_direction_output(gpio + TWL4030_GPIO_MAX + 1, 0) == 0))
                gpio_export(gpio + TWL4030_GPIO_MAX + 1, 0);
-               gpio_set_value(gpio + TWL4030_GPIO_MAX + 1, 0);
-       } else
+       else
                pr_warning("IGEP v2: Could not obtain gpio GPIO_LED1_GREEN\n");
 #else
        igep2_gpio_leds[3].gpio = gpio + TWL4030_GPIO_MAX + 1;
-- 
1.7.2.2

--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to