The OMAP3 clock code contains some legacy code to allow the MPU rate to be specified as a kernel command line parameter. If the 'mpurate' parameter is specified, the kernel will attempt to switch the MPU rate to this rate during boot. As part of this process, a short message "Switched to new clocking rate" is generated -- and in this message, the "Core" clock rate and "MPU" clock rate are transposed.
This patch ensures that the clock rates are displayed in the correct order. Thanks to Bruno Guerin <[email protected]> for reporting this bug and proposing a fix. Thanks to Richard Woodruff <[email protected]> for reviewing the problem and passing the report on. Signed-off-by: Paul Walmsley <[email protected]> Cc: Bruno Guerin <[email protected]> Cc: Richard Woodruff <[email protected]> --- arch/arm/mach-omap2/clock3xxx.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-) diff --git a/arch/arm/mach-omap2/clock3xxx.c b/arch/arm/mach-omap2/clock3xxx.c index a447c4d..90b9477 100644 --- a/arch/arm/mach-omap2/clock3xxx.c +++ b/arch/arm/mach-omap2/clock3xxx.c @@ -94,7 +94,7 @@ static int __init omap3xxx_clk_arch_init(void) ret = omap2_clk_switch_mpurate_at_boot("dpll1_ck"); if (!ret) - omap2_clk_print_new_rates("osc_sys_ck", "arm_fck", "core_ck"); + omap2_clk_print_new_rates("osc_sys_ck", "core_ck", "arm_fck"); return ret; } -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
