If the TPA6130 is compiled as module the id and power_gpio values are arbitrary at module probing time since the rx51_tpa6130a2_data was marked as __initdata. Fix this by using __initdata_or_module. Then __initdata is defined only if the kernel is built without CONFIG_MODULES and omitted otherwise.
Signed-off-by: Jarkko Nikula <[email protected]> --- For 2.6.38 as the TPA6130 is not used in 2.6.37. v2 - __initdata not removed but replaced with __initdata_or_module. Thanks to Tony Lindgren <[email protected]> for hint. --- arch/arm/mach-omap2/board-rx51-peripherals.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-) diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c index 7ea2081..fd95ccf 100644 --- a/arch/arm/mach-omap2/board-rx51-peripherals.c +++ b/arch/arm/mach-omap2/board-rx51-peripherals.c @@ -722,7 +722,7 @@ static struct twl4030_platform_data rx51_twldata __initdata = { .vio = &rx51_vio, }; -static struct tpa6130a2_platform_data rx51_tpa6130a2_data __initdata = { +static struct tpa6130a2_platform_data rx51_tpa6130a2_data __initdata_or_module = { .id = TPA6130A2, .power_gpio = 98, }; -- 1.7.0.4 -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
