The display reset lines are connected to a TPS65930 which may sleep when changing GPIO values. Use the appropriate function to silence a nasty warning from gpiolib.
Signed-off-by: Daniel Morsing <[email protected]> --- arch/arm/mach-omap2/board-devkit8000.c | 8 ++++---- 1 files changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c index 53ac762..f1f58f5 100644 --- a/arch/arm/mach-omap2/board-devkit8000.c +++ b/arch/arm/mach-omap2/board-devkit8000.c @@ -118,27 +118,27 @@ static int devkit8000_panel_enable_lcd(struct omap_dss_device *dssdev) twl_i2c_write_u8(TWL4030_MODULE_LED, 0x0, 0x0); if (gpio_is_valid(dssdev->reset_gpio)) - gpio_set_value(dssdev->reset_gpio, 1); + gpio_set_value_cansleep(dssdev->reset_gpio, 1); return 0; } static void devkit8000_panel_disable_lcd(struct omap_dss_device *dssdev) { if (gpio_is_valid(dssdev->reset_gpio)) - gpio_set_value(dssdev->reset_gpio, 0); + gpio_set_value_cansleep(dssdev->reset_gpio, 0); } static int devkit8000_panel_enable_dvi(struct omap_dss_device *dssdev) { if (gpio_is_valid(dssdev->reset_gpio)) - gpio_set_value(dssdev->reset_gpio, 1); + gpio_set_value_cansleep(dssdev->reset_gpio, 1); return 0; } static void devkit8000_panel_disable_dvi(struct omap_dss_device *dssdev) { if (gpio_is_valid(dssdev->reset_gpio)) - gpio_set_value(dssdev->reset_gpio, 0); + gpio_set_value_cansleep(dssdev->reset_gpio, 0); } static struct regulator_consumer_supply devkit8000_vmmc1_supply = -- 1.7.3.3 -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
