On Sun, Jan 9, 2011 at 9:07 AM, Elvis Dowson <elvis.dow...@mac.com> wrote: > Hi Steve, > > On Jan 9, 2011, at 9:00 PM, Steve Sakoman wrote: > >>> mmcblk0: error -110 sending read/write command, response 0x900, card >>> status 0xe00 > > Error -110 is ETIMEOUT. > > The card might be getting detected but not powering up, perhaps? something to > do with > voltage regulator setup or probably a bad mmc hardware port?
Not likely to be bad hardware since it fails the same way on multiple Overo and Beagle boards. And not likely to be a bad SD card, since the cards work perfectly on my desktop and laptop. I suspect something marginal in the mmc interface hw/config. If you look at the schematics for most boards the mmc card is directly connected to the OMAP for signal lines, and the twl4030 for power. As such, I'm not surprised that these cards fail with every OMAP3 board I've tried. > I'm using a 2GB class 4 SanDisk microSD card with a custom beagle board, and > tried it with > android-2.6.32 kernel as well as mainline 2.6.37-rc7 kernel, it worked fine. Sure, I have tons of SanDisk cards that work perfectly (and always have). It is the brand new, just out of the box Sandisk that fails. Steve -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
