On Mon, Jan 24, 2011 at 20:01, <[email protected]> wrote: > From: Vaibhav Hiremath <[email protected]> > > Since TWL GPIO's can go into sleep, and using normal > gpio_get/set_value() API will lead to kernel dump (WARN_ON()). > So replacing standard gpio_get/set_value() to > gpio_get_set_value_cansleep(). > > Signed-off-by: Vaibhav Hiremath <[email protected]>
Reviewed-by: Charulatha V <[email protected] > --- > arch/arm/mach-omap2/board-omap3evm.c | 12 ++++++------ > 1 files changed, 6 insertions(+), 6 deletions(-) > > diff --git a/arch/arm/mach-omap2/board-omap3evm.c > b/arch/arm/mach-omap2/board-omap3evm.c > index 323c380..a158d21 100644 > --- a/arch/arm/mach-omap2/board-omap3evm.c > +++ b/arch/arm/mach-omap2/board-omap3evm.c > @@ -235,9 +235,9 @@ static int omap3_evm_enable_lcd(struct omap_dss_device > *dssdev) > gpio_set_value(OMAP3EVM_LCD_PANEL_ENVDD, 0); > > if (get_omap3_evm_rev() >= OMAP3EVM_BOARD_GEN_2) > - gpio_set_value(OMAP3EVM_LCD_PANEL_BKLIGHT_GPIO, 0); > + gpio_set_value_cansleep(OMAP3EVM_LCD_PANEL_BKLIGHT_GPIO, 0); > else > - gpio_set_value(OMAP3EVM_LCD_PANEL_BKLIGHT_GPIO, 1); > + gpio_set_value_cansleep(OMAP3EVM_LCD_PANEL_BKLIGHT_GPIO, 1); > > lcd_enabled = 1; > return 0; > @@ -248,9 +248,9 @@ static void omap3_evm_disable_lcd(struct omap_dss_device > *dssdev) > gpio_set_value(OMAP3EVM_LCD_PANEL_ENVDD, 1); > > if (get_omap3_evm_rev() >= OMAP3EVM_BOARD_GEN_2) > - gpio_set_value(OMAP3EVM_LCD_PANEL_BKLIGHT_GPIO, 1); > + gpio_set_value_cansleep(OMAP3EVM_LCD_PANEL_BKLIGHT_GPIO, 1); > else > - gpio_set_value(OMAP3EVM_LCD_PANEL_BKLIGHT_GPIO, 0); > + gpio_set_value_cansleep(OMAP3EVM_LCD_PANEL_BKLIGHT_GPIO, 0); > > lcd_enabled = 0; > } > @@ -289,7 +289,7 @@ static int omap3_evm_enable_dvi(struct omap_dss_device > *dssdev) > return -EINVAL; > } > > - gpio_set_value(OMAP3EVM_DVI_PANEL_EN_GPIO, 1); > + gpio_set_value_cansleep(OMAP3EVM_DVI_PANEL_EN_GPIO, 1); > > dvi_enabled = 1; > return 0; > @@ -297,7 +297,7 @@ static int omap3_evm_enable_dvi(struct omap_dss_device > *dssdev) > > static void omap3_evm_disable_dvi(struct omap_dss_device *dssdev) > { > - gpio_set_value(OMAP3EVM_DVI_PANEL_EN_GPIO, 0); > + gpio_set_value_cansleep(OMAP3EVM_DVI_PANEL_EN_GPIO, 0); > > dvi_enabled = 0; > } > -- > 1.6.2.4 > > -- > To unsubscribe from this list: send the line "unsubscribe linux-omap" in > the body of a message to [email protected] > More majordomo info at http://vger.kernel.org/majordomo-info.html > -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
