> -----Original Message----- > From: Varadarajan, Charulatha [mailto:[email protected]] > Sent: Monday, January 24, 2011 8:12 PM > To: Hiremath, Vaibhav > Cc: [email protected]; [email protected]; [email protected] > Subject: Re: [PATCH] OMAP3EVM: Made backlight GPIO default state to off > > On Mon, Jan 24, 2011 at 20:06, <[email protected]> wrote: > > From: Vaibhav Hiremath <[email protected]> > > > > If you choose default output to DVI, the LCD backlight stays on, > > since panel->disable function never gets called. > > > > So, during init put backlight GPIO to off state and the driver > > code will decide which output to enable. > > > > Signed-off-by: Vaibhav Hiremath <[email protected]> > > --- > > arch/arm/mach-omap2/board-omap3evm.c | 5 ++++- > > 1 files changed, 4 insertions(+), 1 deletions(-) > > > > diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach- > omap2/board-omap3evm.c > > index 1b8a806..3f5117a 100644 > > --- a/arch/arm/mach-omap2/board-omap3evm.c > > +++ b/arch/arm/mach-omap2/board-omap3evm.c > > @@ -448,7 +448,10 @@ static int omap3evm_twl_gpio_setup(struct device > *dev, > > > > /* TWL4030_GPIO_MAX + 0 == ledA, LCD Backlight control */ > > gpio_request(gpio + TWL4030_GPIO_MAX, "EN_LCD_BKL"); > > Check for the return value and then only proceed > [Hiremath, Vaibhav] I do agree with you, we should check the return value. But just to clarify on this, the line above is not being added be me. Its original code.
I will change the patch and submit it again shortly. Thanks, Vaibhav > > - gpio_direction_output(gpio + TWL4030_GPIO_MAX, 0); > > + if (get_omap3_evm_rev() >= OMAP3EVM_BOARD_GEN_2) > > + gpio_direction_output(gpio + TWL4030_GPIO_MAX, 1); > > Check for the return value > > > + else > > + gpio_direction_output(gpio + TWL4030_GPIO_MAX, 0); > > Ditto > > > > > /* gpio + 7 == DVI Enable */ > > gpio_request(gpio + 7, "EN_DVI"); > > -- > > 1.6.2.4 > > -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
