> -----Original Message----- > From: Felipe Balbi [mailto:[email protected]] > Sent: Thursday, February 03, 2011 5:26 PM > To: Rajendra Nayak > Cc: [email protected]; [email protected]; [email protected] > Subject: Re: [PATCH 1/2] omap3sdp: Fix regulator mapping for ads7846 TS controller > > Hi, > > On Thu, Feb 03, 2011 at 05:01:44PM +0530, Rajendra Nayak wrote: > > diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c > > index d4e41ef..dcdc718 100644 > > --- a/arch/arm/mach-omap2/board-3430sdp.c > > +++ b/arch/arm/mach-omap2/board-3430sdp.c > > @@ -427,6 +427,10 @@ static struct twl4030_madc_platform_data sdp3430_madc_data = { > > .irq_line = 1, > > }; > > > > +/* ads7846 on SPI */ > > +static struct regulator_consumer_supply sdp3430_vaux3_supply = > > + REGULATOR_SUPPLY("vcc", "spi1.0"); > > + > > /* > > * Apply all the fixed voltages since most versions of U-Boot > > * don't bother with that initialization. > > @@ -469,6 +473,8 @@ static struct regulator_init_data sdp3430_vaux3 = { > > .valid_ops_mask = REGULATOR_CHANGE_MODE > > | REGULATOR_CHANGE_STATUS, > > }, > > + .num_consumer_supplies = 1, > > + .consumer_supplies = &sdp3430_vaux3_supply, > > }; > > this is not the expected way of using the regulator framework, you > should have: > > static struct regulator_consumer_supply sdp3430_vaux3_supplies[] = > { REGULATOR_SUPPLY("vcc", "spi1.0"), }, > }; > > ... > > .num_consume_supplies = ARRAY_SIZE(sdp3430_vaux3_supplies), > .consumer_supplies = sdp3430_vaux3_supplies,
Yup, makes sense. Will fix that and repost. > > or something similar. (completely untested though). > > -- > balbi -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
