Allow machine specific init of the DEBUG_LL serial port. This is needed
to debug kernels built with support for multiple machines compiled in
without recompiling the kernel.
As some SoCs need to use variables to store the port address and LSR
register configuration, we must call inituart again after clearing
the BSS.
If variables are being used for for inituart and addruart, this setup
won't work properly for debugging the uncompress code without patching
arch/arm/boot/compressed/head.S for the machine in question.
For adding DEBUG_LL support for new machines, only two lines are needed
in debug-macro.S:
.macro inituart, id, a, v
...
ldr \v, =MACH_TYPE_SOMETHING1
cmp \id, \v
ldrne \v, =MACH_TYPE_SOMETHING2
cmpne \id, \v
ldrne \v, =MACH_TYPE_SOMETHING3
cmpne \id, \v
...
.endm
Note that this patch depends on a patch to add empty inituart macro for
each debug-macro.S file.
Signed-off-by: Tony Lindgren <[email protected]>
---
arch/arm/kernel/head-common.S | 7 +++++++
arch/arm/kernel/head.S | 5 +++++
2 files changed, 12 insertions(+), 0 deletions(-)
diff --git a/arch/arm/kernel/head-common.S b/arch/arm/kernel/head-common.S
index c84b57d..0b66d6b 100644
--- a/arch/arm/kernel/head-common.S
+++ b/arch/arm/kernel/head-common.S
@@ -63,6 +63,9 @@ ENDPROC(__vet_atags)
* r1 = machine ID
* r2 = atags pointer
* r9 = processor ID
+ *
+ * Note that if the machine uses BSS to store the debug UART configuration,
+ * debug_ll code will not work after clear BSS until inituart is called again.
*/
__INIT
__mmap_switched:
@@ -80,6 +83,10 @@ __mmap_switched:
strcc fp, [r6],#4
bcc 1b
+#if defined(CONFIG_DEBUG_LL) && !defined(CONFIG_DEBUG_ICEDCC)
+ inituart r1, r4, r5
+#endif
+
ARM( ldmia r3, {r4, r5, r6, r7, sp})
THUMB( ldmia r3, {r4, r5, r6, r7} )
THUMB( ldr sp, [r3, #16] )
diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S
index 591a2ea..be64264 100644
--- a/arch/arm/kernel/head.S
+++ b/arch/arm/kernel/head.S
@@ -75,6 +75,11 @@
ENTRY(stext)
setmode PSR_F_BIT | PSR_I_BIT | SVC_MODE, r9 @ ensure svc mode
@ and irqs disabled
+
+#if defined(CONFIG_DEBUG_LL) && !defined(CONFIG_DEBUG_ICEDCC)
+ inituart r1, r3, r4
+#endif
+
mrc p15, 0, r9, c0, c0 @ get processor id
bl __lookup_processor_type @ r5=procinfo r9=cpuid
movs r10, r5 @ invalid processor (r5=0)?
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
