Enable hardware gate control for all dpll MX postdividers. This requires the allow_idle/deny_idle functions to be populated for all clock nodes (mx post dividers) in clkops.
Signed-off-by: Rajendra Nayak <[email protected]> --- arch/arm/mach-omap2/clock.c | 5 ++++ arch/arm/mach-omap2/clock.h | 1 + arch/arm/mach-omap2/clock44xx_data.c | 40 +++++++++++++++++----------------- 3 files changed, 26 insertions(+), 20 deletions(-) diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c index 909e3c5..6ec4c67 100644 --- a/arch/arm/mach-omap2/clock.c +++ b/arch/arm/mach-omap2/clock.c @@ -388,6 +388,11 @@ const struct clkops clkops_omap3_core_dpll_ops = { #endif +const struct clkops clkops_omap4_dpllmx_ops = { + .allow_idle = omap4_dpllmx_allow_gatectrl, + .deny_idle = omap4_dpllmx_deny_gatectrl, +}; + /* * OMAP2+ clock reset and init functions */ diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h index c450d69..0725a6a 100644 --- a/arch/arm/mach-omap2/clock.h +++ b/arch/arm/mach-omap2/clock.h @@ -150,5 +150,6 @@ extern void omap2_clk_exit_cpufreq_table(struct cpufreq_frequency_table **table) extern const struct clkops clkops_omap3_noncore_dpll_ops; extern const struct clkops clkops_omap3_core_dpll_ops; +extern const struct clkops clkops_omap4_dpllmx_ops; #endif diff --git a/arch/arm/mach-omap2/clock44xx_data.c b/arch/arm/mach-omap2/clock44xx_data.c index b843b6e..157c51f 100644 --- a/arch/arm/mach-omap2/clock44xx_data.c +++ b/arch/arm/mach-omap2/clock44xx_data.c @@ -328,7 +328,7 @@ static struct clk dpll_abe_m2x2_ck = { .clksel = dpll_abe_m2x2_div, .clksel_reg = OMAP4430_CM_DIV_M2_DPLL_ABE, .clksel_mask = OMAP4430_DPLL_CLKOUT_DIV_MASK, - .ops = &clkops_null, + .ops = &clkops_omap4_dpllmx_ops, .recalc = &omap2_clksel_recalc, .round_rate = &omap2_clksel_round_rate, .set_rate = &omap2_clksel_set_rate, @@ -395,7 +395,7 @@ static struct clk dpll_abe_m3x2_ck = { .clksel = dpll_abe_m2x2_div, .clksel_reg = OMAP4430_CM_DIV_M3_DPLL_ABE, .clksel_mask = OMAP4430_DPLL_CLKOUTHIF_DIV_MASK, - .ops = &clkops_null, + .ops = &clkops_omap4_dpllmx_ops, .recalc = &omap2_clksel_recalc, .round_rate = &omap2_clksel_round_rate, .set_rate = &omap2_clksel_set_rate, @@ -465,7 +465,7 @@ static struct clk dpll_core_m6x2_ck = { .clksel = dpll_core_m6x2_div, .clksel_reg = OMAP4430_CM_DIV_M6_DPLL_CORE, .clksel_mask = OMAP4430_HSDIVIDER_CLKOUT3_DIV_MASK, - .ops = &clkops_null, + .ops = &clkops_omap4_dpllmx_ops, .recalc = &omap2_clksel_recalc, .round_rate = &omap2_clksel_round_rate, .set_rate = &omap2_clksel_set_rate, @@ -495,7 +495,7 @@ static struct clk dpll_core_m2_ck = { .clksel = dpll_core_m2_div, .clksel_reg = OMAP4430_CM_DIV_M2_DPLL_CORE, .clksel_mask = OMAP4430_DPLL_CLKOUT_DIV_MASK, - .ops = &clkops_null, + .ops = &clkops_omap4_dpllmx_ops, .recalc = &omap2_clksel_recalc, .round_rate = &omap2_clksel_round_rate, .set_rate = &omap2_clksel_set_rate, @@ -515,7 +515,7 @@ static struct clk dpll_core_m5x2_ck = { .clksel = dpll_core_m6x2_div, .clksel_reg = OMAP4430_CM_DIV_M5_DPLL_CORE, .clksel_mask = OMAP4430_HSDIVIDER_CLKOUT2_DIV_MASK, - .ops = &clkops_null, + .ops = &clkops_omap4_dpllmx_ops, .recalc = &omap2_clksel_recalc, .round_rate = &omap2_clksel_round_rate, .set_rate = &omap2_clksel_set_rate, @@ -581,7 +581,7 @@ static struct clk dpll_core_m4x2_ck = { .clksel = dpll_core_m6x2_div, .clksel_reg = OMAP4430_CM_DIV_M4_DPLL_CORE, .clksel_mask = OMAP4430_HSDIVIDER_CLKOUT1_DIV_MASK, - .ops = &clkops_null, + .ops = &clkops_omap4_dpllmx_ops, .recalc = &omap2_clksel_recalc, .round_rate = &omap2_clksel_round_rate, .set_rate = &omap2_clksel_set_rate, @@ -606,7 +606,7 @@ static struct clk dpll_abe_m2_ck = { .clksel = dpll_abe_m2_div, .clksel_reg = OMAP4430_CM_DIV_M2_DPLL_ABE, .clksel_mask = OMAP4430_DPLL_CLKOUT_DIV_MASK, - .ops = &clkops_null, + .ops = &clkops_omap4_dpllmx_ops, .recalc = &omap2_clksel_recalc, .round_rate = &omap2_clksel_round_rate, .set_rate = &omap2_clksel_set_rate, @@ -632,7 +632,7 @@ static struct clk dpll_core_m7x2_ck = { .clksel = dpll_core_m6x2_div, .clksel_reg = OMAP4430_CM_DIV_M7_DPLL_CORE, .clksel_mask = OMAP4430_HSDIVIDER_CLKOUT4_DIV_MASK, - .ops = &clkops_null, + .ops = &clkops_omap4_dpllmx_ops, .recalc = &omap2_clksel_recalc, .round_rate = &omap2_clksel_round_rate, .set_rate = &omap2_clksel_set_rate, @@ -704,7 +704,7 @@ static struct clk dpll_iva_m4x2_ck = { .clksel = dpll_iva_m4x2_div, .clksel_reg = OMAP4430_CM_DIV_M4_DPLL_IVA, .clksel_mask = OMAP4430_HSDIVIDER_CLKOUT1_DIV_MASK, - .ops = &clkops_null, + .ops = &clkops_omap4_dpllmx_ops, .recalc = &omap2_clksel_recalc, .round_rate = &omap2_clksel_round_rate, .set_rate = &omap2_clksel_set_rate, @@ -716,7 +716,7 @@ static struct clk dpll_iva_m5x2_ck = { .clksel = dpll_iva_m4x2_div, .clksel_reg = OMAP4430_CM_DIV_M5_DPLL_IVA, .clksel_mask = OMAP4430_HSDIVIDER_CLKOUT2_DIV_MASK, - .ops = &clkops_null, + .ops = &clkops_omap4_dpllmx_ops, .recalc = &omap2_clksel_recalc, .round_rate = &omap2_clksel_round_rate, .set_rate = &omap2_clksel_set_rate, @@ -764,7 +764,7 @@ static struct clk dpll_mpu_m2_ck = { .clksel = dpll_mpu_m2_div, .clksel_reg = OMAP4430_CM_DIV_M2_DPLL_MPU, .clksel_mask = OMAP4430_DPLL_CLKOUT_DIV_MASK, - .ops = &clkops_null, + .ops = &clkops_omap4_dpllmx_ops, .recalc = &omap2_clksel_recalc, .round_rate = &omap2_clksel_round_rate, .set_rate = &omap2_clksel_set_rate, @@ -837,7 +837,7 @@ static struct clk dpll_per_m2_ck = { .clksel = dpll_per_m2_div, .clksel_reg = OMAP4430_CM_DIV_M2_DPLL_PER, .clksel_mask = OMAP4430_DPLL_CLKOUT_DIV_MASK, - .ops = &clkops_null, + .ops = &clkops_omap4_dpllmx_ops, .recalc = &omap2_clksel_recalc, .round_rate = &omap2_clksel_round_rate, .set_rate = &omap2_clksel_set_rate, @@ -861,7 +861,7 @@ static struct clk dpll_per_m2x2_ck = { .clksel = dpll_per_m2x2_div, .clksel_reg = OMAP4430_CM_DIV_M2_DPLL_PER, .clksel_mask = OMAP4430_DPLL_CLKOUT_DIV_MASK, - .ops = &clkops_null, + .ops = &clkops_omap4_dpllmx_ops, .recalc = &omap2_clksel_recalc, .round_rate = &omap2_clksel_round_rate, .set_rate = &omap2_clksel_set_rate, @@ -887,7 +887,7 @@ static struct clk dpll_per_m4x2_ck = { .clksel = dpll_per_m2x2_div, .clksel_reg = OMAP4430_CM_DIV_M4_DPLL_PER, .clksel_mask = OMAP4430_HSDIVIDER_CLKOUT1_DIV_MASK, - .ops = &clkops_null, + .ops = &clkops_omap4_dpllmx_ops, .recalc = &omap2_clksel_recalc, .round_rate = &omap2_clksel_round_rate, .set_rate = &omap2_clksel_set_rate, @@ -899,7 +899,7 @@ static struct clk dpll_per_m5x2_ck = { .clksel = dpll_per_m2x2_div, .clksel_reg = OMAP4430_CM_DIV_M5_DPLL_PER, .clksel_mask = OMAP4430_HSDIVIDER_CLKOUT2_DIV_MASK, - .ops = &clkops_null, + .ops = &clkops_omap4_dpllmx_ops, .recalc = &omap2_clksel_recalc, .round_rate = &omap2_clksel_round_rate, .set_rate = &omap2_clksel_set_rate, @@ -911,7 +911,7 @@ static struct clk dpll_per_m6x2_ck = { .clksel = dpll_per_m2x2_div, .clksel_reg = OMAP4430_CM_DIV_M6_DPLL_PER, .clksel_mask = OMAP4430_HSDIVIDER_CLKOUT3_DIV_MASK, - .ops = &clkops_null, + .ops = &clkops_omap4_dpllmx_ops, .recalc = &omap2_clksel_recalc, .round_rate = &omap2_clksel_round_rate, .set_rate = &omap2_clksel_set_rate, @@ -923,7 +923,7 @@ static struct clk dpll_per_m7x2_ck = { .clksel = dpll_per_m2x2_div, .clksel_reg = OMAP4430_CM_DIV_M7_DPLL_PER, .clksel_mask = OMAP4430_HSDIVIDER_CLKOUT4_DIV_MASK, - .ops = &clkops_null, + .ops = &clkops_omap4_dpllmx_ops, .recalc = &omap2_clksel_recalc, .round_rate = &omap2_clksel_round_rate, .set_rate = &omap2_clksel_set_rate, @@ -979,7 +979,7 @@ static struct clk dpll_unipro_m2x2_ck = { .clksel = dpll_unipro_m2x2_div, .clksel_reg = OMAP4430_CM_DIV_M2_DPLL_UNIPRO, .clksel_mask = OMAP4430_DPLL_CLKOUT_DIV_MASK, - .ops = &clkops_null, + .ops = &clkops_omap4_dpllmx_ops, .recalc = &omap2_clksel_recalc, .round_rate = &omap2_clksel_round_rate, .set_rate = &omap2_clksel_set_rate, @@ -1028,7 +1028,7 @@ static struct clk dpll_usb_ck = { static struct clk dpll_usb_clkdcoldo_ck = { .name = "dpll_usb_clkdcoldo_ck", .parent = &dpll_usb_ck, - .ops = &clkops_null, + .ops = &clkops_omap4_dpllmx_ops, .recalc = &followparent_recalc, }; @@ -1043,7 +1043,7 @@ static struct clk dpll_usb_m2_ck = { .clksel = dpll_usb_m2_div, .clksel_reg = OMAP4430_CM_DIV_M2_DPLL_USB, .clksel_mask = OMAP4430_DPLL_CLKOUT_DIV_0_6_MASK, - .ops = &clkops_null, + .ops = &clkops_omap4_dpllmx_ops, .recalc = &omap2_clksel_recalc, .round_rate = &omap2_clksel_round_rate, .set_rate = &omap2_clksel_set_rate, -- 1.7.0.4 -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
