In OMAP4 Blaze and Panda, 32KHz clock to WLAN is supplied from Phoenix TWL6030. The 32KHz clock state (ON/OFF) is configured in CLK32KG_CFG_[GRP, TRANS, STATE] register. This follows the same register programming model as other regulators in TWL6030. So add CLK32KG as pseudo regulator.
Signed-off-by: Balaji T K <[email protected]> --- v2 changes: implement TWL6030_FIXED_RESOURCE for clk32kg drivers/mfd/twl-core.c | 4 ++++ drivers/regulator/twl-regulator.c | 24 +++++++++++++++++++++++- include/linux/i2c/twl.h | 2 ++ 3 files changed, 29 insertions(+), 1 deletions(-) diff --git a/drivers/mfd/twl-core.c b/drivers/mfd/twl-core.c index a35fa7d..7d909cc 100644 --- a/drivers/mfd/twl-core.c +++ b/drivers/mfd/twl-core.c @@ -864,6 +864,10 @@ add_children(struct twl4030_platform_data *pdata, unsigned long features) child = add_regulator(TWL6030_REG_VAUX3_6030, pdata->vaux3); if (IS_ERR(child)) return PTR_ERR(child); + + child = add_regulator(TWL6030_REG_CLK32KG, pdata->clk32kg); + if (IS_ERR(child)) + return PTR_ERR(child); } if (twl_has_bci() && pdata->bci && diff --git a/drivers/regulator/twl-regulator.c b/drivers/regulator/twl-regulator.c index bd332cf..6a29285 100644 --- a/drivers/regulator/twl-regulator.c +++ b/drivers/regulator/twl-regulator.c @@ -475,6 +475,13 @@ static struct regulator_ops twlfixed_ops = { .get_status = twlreg_get_status, }; +static struct regulator_ops twl6030_fixed_resource = { + .enable = twlreg_enable, + .disable = twlreg_disable, + .is_enabled = twlreg_is_enabled, + .get_status = twlreg_get_status, +}; + /*----------------------------------------------------------------------*/ #define TWL4030_FIXED_LDO(label, offset, mVolts, num, turnon_delay, \ @@ -538,6 +545,20 @@ static struct regulator_ops twlfixed_ops = { }, \ } +#define TWL6030_FIXED_RESOURCE(label, offset, num, turnon_delay, remap_conf) { \ + .base = offset, \ + .id = num, \ + .delay = turnon_delay, \ + .remap = remap_conf, \ + .desc = { \ + .name = #label, \ + .id = TWL6030_REG_##label, \ + .ops = &twl6030_fixed_resource, \ + .type = REGULATOR_VOLTAGE, \ + .owner = THIS_MODULE, \ + }, \ + } + /* * We list regulators here if systems need some level of * software control over them after boot. @@ -577,7 +598,8 @@ static struct twlreg_info twl_regs[] = { TWL6030_FIXED_LDO(VANA, 0x50, 2100, 15, 0, 0x21), TWL6030_FIXED_LDO(VCXIO, 0x60, 1800, 16, 0, 0x21), TWL6030_FIXED_LDO(VDAC, 0x64, 1800, 17, 0, 0x21), - TWL6030_FIXED_LDO(VUSB, 0x70, 3300, 18, 0, 0x21) + TWL6030_FIXED_LDO(VUSB, 0x70, 3300, 18, 0, 0x21), + TWL6030_FIXED_RESOURCE(CLK32KG, 0x8C, 48, 0, 0x21), }; static int __devinit twlreg_probe(struct platform_device *pdev) diff --git a/include/linux/i2c/twl.h b/include/linux/i2c/twl.h index 61b9609..7086e1e 100644 --- a/include/linux/i2c/twl.h +++ b/include/linux/i2c/twl.h @@ -698,6 +698,7 @@ struct twl4030_platform_data { struct regulator_init_data *vana; struct regulator_init_data *vcxio; struct regulator_init_data *vusb; + struct regulator_init_data *clk32kg; }; /*----------------------------------------------------------------------*/ @@ -777,5 +778,6 @@ static inline int twl4030charger_usb_en(int enable) { return 0; } /* INTERNAL LDOs */ #define TWL6030_REG_VRTC 47 +#define TWL6030_REG_CLK32KG 48 #endif /* End of __TWL4030_H */ -- 1.7.0.4 -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
