Currently, there is no way to specify a recommended bpp for a generic dpi display. This patch adds a mechanism for doing so.
If no recommended bpp is specified by the driver, we fall back to the default recommended bpp function Signed-off-by: Daniel Morsing <[email protected]> --- drivers/video/omap2/displays/panel-generic-dpi.c | 15 +++++++++++++++ 1 files changed, 15 insertions(+), 0 deletions(-) diff --git a/drivers/video/omap2/displays/panel-generic-dpi.c b/drivers/video/omap2/displays/panel-generic-dpi.c index 07eb30e..b52a28f 100644 --- a/drivers/video/omap2/displays/panel-generic-dpi.c +++ b/drivers/video/omap2/displays/panel-generic-dpi.c @@ -43,6 +43,8 @@ struct panel_config { /* Unit: line clocks */ int acb; /* ac-bias pin frequency */ + int recommended_bpp; /* overrides the default bpp */ + enum omap_panel_config config; int power_on_delay; @@ -331,6 +333,17 @@ static int generic_dpi_panel_check_timings(struct omap_dss_device *dssdev, return dpi_check_timings(dssdev, timings); } +static int generic_dpi_panel_get_bpp(struct omap_dss_device *dssdev) +{ + struct panel_drv_data *drv_data = dev_get_drvdata(&dssdev->dev); + struct panel_config *panel_config = drv_data->panel_config; + + if (panel_config->recommended_bpp != 0) + return panel_config->recommended_bpp; + + return omapdss_default_get_recommended_bpp(dssdev); +} + static struct omap_dss_driver dpi_driver = { .probe = generic_dpi_panel_probe, .remove = generic_dpi_panel_remove, @@ -344,6 +357,8 @@ static struct omap_dss_driver dpi_driver = { .get_timings = generic_dpi_panel_get_timings, .check_timings = generic_dpi_panel_check_timings, + .get_recommended_bpp = generic_dpi_panel_get_bpp, + .driver = { .name = "generic_dpi_panel", .owner = THIS_MODULE, -- 1.7.4 -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
