On Fri, Feb 11, 2011 at 03:31:20PM -0800, Kevin Hilman wrote:
> Hi Dave,
>
> Dave Martin <[email protected]> writes:
>
> > This set of patches, along with some other patches under
> > discussion on alkml, should enable omap3 and omap4 kernels to be
> > built with CONFIG_THUMB2_KERNEL.
>
> OK, I tried some more testing with your 'dirty' branch merged with my PM
> branch.
>
> Compiled in ARM mode, everything worked as expected on my 3530/omap3evm,
> including off-mode (in suspend and idle). My 3630 (Zoom3) also can't do
> CORE off due to i583, but MPU, PER etc. all can hit off.
>
> To rebuild in Thumb-2 mode, I disabled OMAP2 support and added Thumb-2
> mode:
>
> CONFIG_ARCH_OMAP2=n
> CONFIG_THUMB2_KERNEL=y
>
> then tested on 3530/omap3evm. Testing suspend/resume to retention
> seemed to work fine. However, enabling retention during idle[1] hung
> someplace (didn't debug further.)
>
> I also tried off-mode, and suspend/resume to off didn't even work.
>
> I didn't have time to debug this any further, so this is just to report
> raw test results.
Thanks, that's a useful step forward anyhow.
A possibility is that the Secure firmware can't cope with
interoperating with Thumb-2 code in the kernel, so that wakeup
entry points the SMC call sites may need to be ARM code.
If you get a moment, if would be interesting to see if this
patch makes a difference ... in the meantime, I'll see if
I can get my hands on an EVM from somewhere.
Cheers
---Dave
diff --git a/arch/arm/mach-omap2/sleep34xx.S b/arch/arm/mach-omap2/sleep34xx.S
index a204c78..ee1edb1 100644
--- a/arch/arm/mach-omap2/sleep34xx.S
+++ b/arch/arm/mach-omap2/sleep34xx.S
@@ -32,6 +32,14 @@
#include "sdrc.h"
#include "control.h"
+#undef ARM
+#undef THUMB
+#undef BSYM
+#define ARM(x...) x
+#define THUMB(x...)
+#define BSYM(x) (x)
+ .arm
+
/*
* Registers access definitions
*/
@@ -289,8 +297,20 @@ clean_l2:
* - should be faster and will change with kernel
* - 'might' have to copy address, load and jump to it
*/
+#ifdef CONFIG_THUMB2_KERNEL
+ /* kernel is non-interworking : must do this from Thumb */
+ adr r1, . + 1
+ bx r1
+ .thumb
+#endif
ldr r1, kernel_flush
blx r1
+#ifdef CONFIG_THUMB2_KERNEL
+ .align
+ bx pc
+ nop
+ .arm
+#endif
omap3_do_wfi:
ldr r4, sdrc_power @ read the SDRC_POWER register
diff --git a/arch/arm/mach-omap2/sram34xx.S b/arch/arm/mach-omap2/sram34xx.S
index 829d235..64faab8 100644
--- a/arch/arm/mach-omap2/sram34xx.S
+++ b/arch/arm/mach-omap2/sram34xx.S
@@ -34,6 +34,14 @@
#include "sdrc.h"
#include "cm2xxx_3xxx.h"
+#undef ARM
+#undef THUMB
+#undef BSYM
+#define ARM(x...) x
+#define THUMB(x...)
+#define BSYM(x) (x)
+ .arm
+
.text
/* r1 parameters */
--
1.7.1
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
