> -----Original Message-----
> From: [email protected] [mailto:linux-omap-
> [email protected]] On Behalf Of DebBarma, Tarun Kanti
> Sent: Tuesday, February 15, 2011 2:50 PM
> To: [email protected]; Hilman, Kevin
> Cc: [email protected]
> Subject: RE: [PATCH] omap: dmtimer: Enable autoidle
> 
> > -----Original Message-----
> > From: [email protected] [mailto:linux-omap-
> > [email protected]] On Behalf Of [email protected]
> > Sent: Tuesday, February 15, 2011 1:47 PM
> > To: Hilman, Kevin
> > Cc: [email protected]
> > Subject: RE: [PATCH] omap: dmtimer: Enable autoidle
> >
> >
> >
> > >-----Original Message-----
> > >From: ext Kevin Hilman [mailto:[email protected]]
> > >Sent: 15 February, 2011 01:29
> > >To: Kristo Tero (Nokia-MS/Tampere)
> > >Cc: [email protected]
> > >Subject: Re: [PATCH] omap: dmtimer: Enable autoidle
> > >
> > >Tero Kristo <[email protected]> writes:
> > >
> > >> This will save some power.
> > >>
> > >> Signed-off-by: Tero Kristo <[email protected]>
> > >
> > >Please report which platforms this was tested with.
> >
> > Tested only on OMAP3.
> >
> > Should this be changed to apply only on that one? I don't know about
> > OMAP4, but I think this should work on OMAP2 at least based on spec.
> It works on OMAP2 and OMAP4.
Ok, on OMAP4 I should have clarified further.
AUTOIDLE is present only for millisecond timers: 1,2,10.
The reset of the timers do not have this bit.
--
Tarun

> 
> >
> >
> > >
> > >Also, please Cc linux-arm-kernel.
> > >
> > >Thanks,
> > >
> > >Kevin
> > >
> > >> ---
> > >>  arch/arm/plat-omap/dmtimer.c |    1 +
> > >>  1 files changed, 1 insertions(+), 0 deletions(-)
> > >>
> > >> diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-
> > >omap/dmtimer.c
> > >> index 1d706cf..949becc 100644
> > >> --- a/arch/arm/plat-omap/dmtimer.c
> > >> +++ b/arch/arm/plat-omap/dmtimer.c
> > >> @@ -341,6 +341,7 @@ static void omap_dm_timer_reset(struct
> > >omap_dm_timer *timer)
> > >>          l = omap_dm_timer_read_reg(timer, OMAP_TIMER_OCP_CFG_REG);
> > >>          l |= 0x02 << 3;  /* Set to smart-idle mode */
> > >>          l |= 0x2 << 8;   /* Set clock activity to perserve f-clock on
> idle
> > >*/
> > >> +        l |= 0x1 << 0;   /* Set autoidle */
> > >>
> > >>          /*
> > >>           * Enable wake-up on OMAP2 CPUs.
> > --
> > To unsubscribe from this list: send the line "unsubscribe linux-omap" in
> > the body of a message to [email protected]
> > More majordomo info at  http://vger.kernel.org/majordomo-info.html
> --
> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
> the body of a message to [email protected]
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to