On Wed, Feb 16, 2011 at 10:02:27AM +0200, Felipe Balbi wrote:
> Hi,
>
> On Wed, Feb 16, 2011 at 08:44:26AM +0200, Tomi Valkeinen wrote:
> > > ah, ok. So it's another problem. I don't have beagle, but I have an old
> > > overo here. Will try tomorrow to see what's going on. Thanks for the
> > > report.
> >
> > Did you get a chance to try this? Or any suggestions what I could try? I
> > could of course try to bisect it, but that's quite laborious as I have
> > to store the kernel into an mmc to be able to use it.
>
> I'm trying to get my overo to work. MMC doesn't seem to be working on
> u-boot again:
>
> Overo # mmc rescan 0
> Overo # fatload mmc 0 82000000 uImage
> reading uImage
> mmc_send_cmd: timedout waiting for cmddis!
> mmc fail to send stop cmd
> mmc_send_cmd: timedout waiting for cmddis!
> Invalid FAT entry
>
> 952320 bytes read
> Overo #
>
> u-boot's HEAD is efb063390d2d1e712c2c8110911616244d562c4b
case I can't get it working, would you care to try the below patch ?
diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index 54a8bd1..bc29655 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -1949,31 +1949,6 @@ musb_init_controller(struct device *dev, int nIrq, void
__iomem *ctrl)
goto fail0;
}
- switch (plat->mode) {
- case MUSB_HOST:
-#ifdef CONFIG_USB_MUSB_HDRC_HCD
- break;
-#else
- goto bad_config;
-#endif
- case MUSB_PERIPHERAL:
-#ifdef CONFIG_USB_GADGET_MUSB_HDRC
- break;
-#else
- goto bad_config;
-#endif
- case MUSB_OTG:
-#ifdef CONFIG_USB_MUSB_OTG
- break;
-#else
-bad_config:
-#endif
- default:
- dev_err(dev, "incompatible Kconfig role setting\n");
- status = -EINVAL;
- goto fail0;
- }
-
/* allocate */
musb = allocate_instance(dev, plat->config, ctrl);
if (!musb) {
--
balbi
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
