Hi, On Thu, Feb 17, 2011 at 02:20:11PM +0200, Felipe Balbi wrote: > On Thu, Feb 17, 2011 at 12:06:04PM +0530, Hema HK wrote: > > From: Kalliguddi, Hema <[email protected]> > > > > Remove the regulator enable while driver loading and enable it only when > > the cable/device is connected and disable it when disconnected. > > > > Remove the configuration of config_state and config_trans register > > configuration as these registers are programmed when regulator > > enable/disable is called. > > > > Signed-off-by: Hema HK <[email protected]> > > Cc: Felipe Balbi <[email protected]> > > Cc: Tony Lindgren <[email protected]> > > Cc: Paul Walmsley <[email protected]> > > Taken these 7. Tested and it works fine.
actually, this series adds: drivers/usb/otg/twl6030-usb.c: In function 'twl6030_phy_suspend': drivers/usb/otg/twl6030-usb.c:183:2: warning: ISO C90 forbids mixed declarations and code drivers/usb/otg/twl6030-usb.c: At top level: drivers/usb/otg/twl6030-usb.c:135:12: warning: 'twl6030_set_phy_clk' defined but not used care to fix and send an incremental diff mentioning which was the offending patch please. -- balbi -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
