Patch series for TWL4030 power scripts and workaround for TWL errata 27.
Changes for implementing TWL4030 power scripts recommended by hardware team.
Introduced a new TWL4030 power script file, which can be used by different
OMAP3 board with the power companion chip TWL4030.
Updated the changes for TWL4030 errata 27 & 28, modified the
TWL4030 power script and voltage controller setuptime.
Workaround for TWL4030 errata 27 & 28 is required for
Si version less than or equal to TWL5030 ES1.1.
TWL4030 script changes rebased on Kevin's PM tree in pm branch.
Changes in v7:
changes to fix Nishanth Menon's comments
i) Added the TWL4030 Errata 27 fix
split the first patch in v6
i) fix for twl4030 script load
ii) correct the warning print during script loading
Added new patch files
i) pmic_info struct cleanup
ii) changing sys_off signal polarity
Updated the change logs
This changes are tested on OMAP3430 & OMAP3630 SDP with off mode enabled in
suspend path.
Tested with suspend/resume script, which will test system suspend in a
loop.
Tested for more than 1000 iterations.
Cc: Nishanth Menon <[email protected]>
Cc: David Derrick <[email protected]>
Cc: Samuel Ortiz <[email protected]>
---
Lesly A M (12):
omap3: pm: Fix for the TRITON sleep/wakeup sequence
omap3: pm: Correct the warning print during script loading
omap3: pm: cleanup pmic_info structure
omap3: pm: Using separate clk/volt setup_time for RET and OFF states
omap3630: pm: Adding voltage controller data
omap3: pm: Correcting the sys_offmode signal polarity
omap3: pm: Re-programing the setup time based on CORE target state
omap3: pm: TWL4030 power scripts for OMAP3 boards
omap3: pm: TWL5030 version checking
mfd: TWL4030: changes for TRITON Errata 27 workaround
omap3430: Updating the board file to use TWL4030 scripts
omap3630: Updating the board file to use TWL4030 scripts
arch/arm/mach-omap2/Makefile | 12 +-
arch/arm/mach-omap2/board-3430sdp.c | 3 +-
arch/arm/mach-omap2/board-zoom-peripherals.c | 2 +
arch/arm/mach-omap2/omap_twl.c | 369 +++++++++++++++++++++++---
arch/arm/mach-omap2/pm34xx.c | 15 +-
arch/arm/mach-omap2/twl4030.c | 261 ++++++++++++++++++
arch/arm/mach-omap2/twl4030.h | 21 ++
arch/arm/mach-omap2/voltage.c | 167 +++++++++---
arch/arm/plat-omap/include/plat/voltage.h | 49 +++-
drivers/mfd/twl-core.c | 50 ++++
drivers/mfd/twl4030-power.c | 79 ++++++-
include/linux/i2c/twl.h | 45 +++-
12 files changed, 961 insertions(+), 112 deletions(-)
create mode 100644 arch/arm/mach-omap2/twl4030.c
create mode 100644 arch/arm/mach-omap2/twl4030.h
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
