Hi Paul, > -----Original Message----- > From: [email protected] [mailto:[email protected]] On Behalf > Of Paul Walmsley > Sent: Monday, February 21, 2011 7:39 AM > To: [email protected]; [email protected] > Cc: [email protected]; [email protected]; [email protected]; [email protected] > Subject: [PATCH 0/3] OMAP2+: voltage: first pass at cleanup/reorganization > > Hello, > > this patch set does an initial round of cleanup on the OMAP "voltage" code > in arch/arm/mach-omap2/voltage.c. As part of this process, the header files > for the voltage code and SmartReflex are moved into arch/arm/mach-omap2, since > they are currently OMAP2+-specific. > > There is still quite a bit of cleanup left to do; hopefully someone else will > get to it before I do. More details are in the last patch. > > This series was built-tested for an OSK5912-specific config, omap1_defconfig, > a N800-specific config, omap2plus_defconfig, an OMAP3-specific config, and > an OMAP4-specific config. It was boot-tested on an OMAP35xx Beagleboard. > Further testing assistance is, of course, appreciated.
I found these abort on my 4430SDP. The below changes I found are needed for it to bootup.. I tested the 'integration-2.6.39' branch of git://git.pwsan.com/linux-integration and the patch is based on this branch. --- >From e3d5e2bb09ecb7a958c1f79b86d1917f0becb8d2 Mon Sep 17 00:00:00 2001 From: Rajendra Nayak <[email protected]> Date: Thu, 24 Feb 2011 16:42:25 +0530 Subject: [PATCH] OMAP4: voltage: Populate missing .vp/.vc_common pointers The common_data for vp and vc on OMAP4 is defined but not hooked up with the corresponding vp/vc_data. This causes an abort at bootup on OMAP4, as the framework api's assumes these to be present. While here, also rename omap4_vp_data to omap4_vp_common and omap4_vc_data to omap4_vc_common to maintain consistency in naming structs across all OMAPs. Signed-off-by: Rajendra Nayak <[email protected]> --- arch/arm/mach-omap2/vc44xx_data.c | 5 ++++- arch/arm/mach-omap2/vp44xx_data.c | 5 ++++- 2 files changed, 8 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-omap2/vc44xx_data.c b/arch/arm/mach-omap2/vc44xx_data.c index 548cb06..a98da8d 100644 --- a/arch/arm/mach-omap2/vc44xx_data.c +++ b/arch/arm/mach-omap2/vc44xx_data.c @@ -30,7 +30,7 @@ * VC data common to 44xx chips * XXX This stuff presumably belongs in the vc3xxx.c or vc.c file. */ -static const struct omap_vc_common_data omap4_vc_data = { +static const struct omap_vc_common_data omap4_vc_common = { .smps_sa_reg = OMAP4_PRM_VC_SMPS_SA_OFFSET, .smps_volra_reg = OMAP4_PRM_VC_VAL_SMPS_RA_VOL_OFFSET, .bypass_val_reg = OMAP4_PRM_VC_VAL_BYPASS_OFFSET, @@ -47,6 +47,7 @@ static const struct omap_vc_common_data omap4_vc_data = { /* VC instance data for each controllable voltage line */ struct omap_vc_instance_data omap4_vc_mpu_data = { + .vc_common = &omap4_vc_common, .cmdval_reg = OMAP4_PRM_VC_VAL_CMD_VDD_MPU_L_OFFSET, .smps_sa_shift = OMAP4430_SA_VDD_MPU_L_PRM_VC_SMPS_SA_SHIFT, .smps_sa_mask = OMAP4430_SA_VDD_MPU_L_PRM_VC_SMPS_SA_MASK, @@ -55,6 +56,7 @@ struct omap_vc_instance_data omap4_vc_mpu_data = { }; struct omap_vc_instance_data omap4_vc_iva_data = { + .vc_common = &omap4_vc_common, .cmdval_reg = OMAP4_PRM_VC_VAL_CMD_VDD_IVA_L_OFFSET, .smps_sa_shift = OMAP4430_SA_VDD_IVA_L_PRM_VC_SMPS_SA_SHIFT, .smps_sa_mask = OMAP4430_SA_VDD_IVA_L_PRM_VC_SMPS_SA_MASK, @@ -63,6 +65,7 @@ struct omap_vc_instance_data omap4_vc_iva_data = { }; struct omap_vc_instance_data omap4_vc_core_data = { + .vc_common = &omap4_vc_common, .cmdval_reg = OMAP4_PRM_VC_VAL_CMD_VDD_CORE_L_OFFSET, .smps_sa_shift = OMAP4430_SA_VDD_CORE_L_0_6_SHIFT, .smps_sa_mask = OMAP4430_SA_VDD_CORE_L_0_6_MASK, diff --git a/arch/arm/mach-omap2/vp44xx_data.c b/arch/arm/mach-omap2/vp44xx_data.c index 7b26f75..65d1ad6 100644 --- a/arch/arm/mach-omap2/vp44xx_data.c +++ b/arch/arm/mach-omap2/vp44xx_data.c @@ -31,7 +31,7 @@ * VP data common to 44xx chips * XXX This stuff presumably belongs in the vp44xx.c or vp.c file. */ -static const struct omap_vp_common_data omap4_vp_data = { +static const struct omap_vp_common_data omap4_vp_common = { .vpconfig_erroroffset_shift = OMAP4430_ERROROFFSET_SHIFT, .vpconfig_errorgain_mask = OMAP4430_ERRORGAIN_MASK, .vpconfig_errorgain_shift = OMAP4430_ERRORGAIN_SHIFT, @@ -56,6 +56,7 @@ static const struct omap_vp_prm_irqst_data omap4_vp_mpu_prm_irqst_data = { }; struct omap_vp_instance_data omap4_vp_mpu_data = { + .vp_common = &omap4_vp_common, .vpconfig = OMAP4_PRM_VP_MPU_CONFIG_OFFSET, .vstepmin = OMAP4_PRM_VP_MPU_VSTEPMIN_OFFSET, .vstepmax = OMAP4_PRM_VP_MPU_VSTEPMAX_OFFSET, @@ -71,6 +72,7 @@ static const struct omap_vp_prm_irqst_data omap4_vp_iva_prm_irqst_data = { }; struct omap_vp_instance_data omap4_vp_iva_data = { + .vp_common = &omap4_vp_common, .vpconfig = OMAP4_PRM_VP_IVA_CONFIG_OFFSET, .vstepmin = OMAP4_PRM_VP_IVA_VSTEPMIN_OFFSET, .vstepmax = OMAP4_PRM_VP_IVA_VSTEPMAX_OFFSET, @@ -86,6 +88,7 @@ static const struct omap_vp_prm_irqst_data omap4_vp_core_prm_irqst_data = { }; struct omap_vp_instance_data omap4_vp_core_data = { + .vp_common = &omap4_vp_common, .vpconfig = OMAP4_PRM_VP_CORE_CONFIG_OFFSET, .vstepmin = OMAP4_PRM_VP_CORE_VSTEPMIN_OFFSET, .vstepmax = OMAP4_PRM_VP_CORE_VSTEPMAX_OFFSET, -- 1.7.0.4 > > This series is available from git://git.pwsan.com/linux-2.6 in the > 'voltage_split_2.6.39' branch. > > > - Paul > > > --- > > voltage_split_2.6.39 > text data bss dec hex filename > 5766071 488104 5596920 11851095 b4d557 vmlinux.omap2plus_defconfig.orig > 5765631 487848 5596920 11850399 b4d29f vmlinux.omap2plus_defconfig > > > Paul Walmsley (3): > OMAP: smartreflex: move plat/smartreflex.h to mach-omap2/smartreflex.h > OMAP: voltage: move plat/voltage.h to mach-omap2/voltage.h > OMAP2+: voltage: reorganize, split code from data > > > arch/arm/mach-omap2/Makefile | 20 > arch/arm/mach-omap2/omap_hwmod_3xxx_data.c | 2 > arch/arm/mach-omap2/omap_opp_data.h | 12 > arch/arm/mach-omap2/omap_twl.c | 2 > arch/arm/mach-omap2/opp3xxx_data.c | 44 + > arch/arm/mach-omap2/opp4xxx_data.c | 30 + > arch/arm/mach-omap2/pm.c | 2 > arch/arm/mach-omap2/smartreflex-class3.c | 2 > arch/arm/mach-omap2/smartreflex.c | 2 > arch/arm/mach-omap2/smartreflex.h | 3 > arch/arm/mach-omap2/sr_device.c | 4 > arch/arm/mach-omap2/vc.h | 83 ++ > arch/arm/mach-omap2/vc3xxx_data.c | 63 ++ > arch/arm/mach-omap2/vc44xx_data.c | 72 ++ > arch/arm/mach-omap2/voltage.c | 1019 +++++++------------------ > arch/arm/mach-omap2/voltage.h | 66 ++ > arch/arm/mach-omap2/voltagedomains3xxx_data.c | 104 +++ > arch/arm/mach-omap2/voltagedomains44xx_data.c | 108 +++ > arch/arm/mach-omap2/vp.h | 143 ++++ > arch/arm/mach-omap2/vp3xxx_data.c | 82 ++ > arch/arm/mach-omap2/vp44xx_data.c | 97 ++ > arch/arm/plat-omap/include/plat/omap_hwmod.h | 1 > 22 files changed, 1203 insertions(+), 758 deletions(-) > rename arch/arm/{plat-omap/include/plat/smartreflex.h => mach-omap2/smartreflex.h} (99%) > create mode 100644 arch/arm/mach-omap2/vc.h > create mode 100644 arch/arm/mach-omap2/vc3xxx_data.c > create mode 100644 arch/arm/mach-omap2/vc44xx_data.c > rename arch/arm/{plat-omap/include/plat/voltage.h => mach-omap2/voltage.h} (68%) > create mode 100644 arch/arm/mach-omap2/voltagedomains3xxx_data.c > create mode 100644 arch/arm/mach-omap2/voltagedomains44xx_data.c > create mode 100644 arch/arm/mach-omap2/vp.h > create mode 100644 arch/arm/mach-omap2/vp3xxx_data.c > create mode 100644 arch/arm/mach-omap2/vp44xx_data.c > > > _______________________________________________ > linux-arm-kernel mailing list > [email protected] > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
0001-OMAP4-voltage-Populate-missing-.vp-.vc_common-pointe.patch
Description: Binary data
