The following series fixes two issues with OMAP 3 and 4 i2c support.
First, hwmod tables don't have the i2c units marked up as being
for 16-bit access only, which is mandatory.
Second, the i2c peripheral unit init code is confused about using
cpu_is...() and probed peripheral unit version, leading to OMAP3
i2c code doing the wrong thing and accessing nonexistant registers.
---
Andy Green (4):
OMAP3 and 4 I2C use cpu type consistently for new register availability
OMAP3 and 4 i2c mark extended reg enums as extended only
OMAP3 I2C document why cpu type and not peripheral unit ID used to probe
OMAP3 and 4 hwmod I2C units only allow 16 bit access
arch/arm/mach-omap2/omap_hwmod_3xxx_data.c | 3 ++
arch/arm/mach-omap2/omap_hwmod_44xx_data.c | 8 +++---
drivers/i2c/busses/i2c-omap.c | 36 +++++++++++++++++++---------
3 files changed, 31 insertions(+), 16 deletions(-)
--
Signature
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
