Santosh Shilimkar <[email protected]> writes: >> -----Original Message----- >> From: Kevin Hilman [mailto:[email protected]] >> Sent: Thursday, March 03, 2011 4:00 AM >> To: Santosh Shilimkar >> Cc: [email protected]; [email protected] >> Subject: Re: [PATCH 08/17] omap4: pm: Add GIC save/restore support >> >> Santosh Shilimkar <[email protected]> writes: >> > > [...] > >> > + /* >> > + * Find out how many interrupts are supported. >> > + * OMAP4 supports max of 128 SPIs where as GIC can support >> > + * up to 1020 interrupt sources. >> > + */ >> > + max_spi_reg = __raw_readl(gic_dist_base_addr + GIC_DIST_CTR) & >> 0x1f; >> > + max_spi_irq = max_spi_reg * 32; >> >> Based on the spec, this should also be max'd at 1020 so you never >> write the reserved values after 1020. >> > > That's correct as per generic GIC specs. On OMAP4, the maximum IRQs > already fused in "DIST_CTR" bit-fields and fixed. Hence we don't > need that additional comparison. >
OK, clarifiying this in the comment above would avoid confusion for anyone looking at this code in combination with the spec. Thanks, Kevin -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
