dsi_vc_send_bta_sync() waits for BTA interrupt with a 500ms timeout. If
a DSI error happens, no BTA is received and the timeout triggers. This
could be handled much faster by listening to DSI errors also.

This patch uses the ISR support to notice DSI errors while waiting for
the BTA, thus speeding up the fail-path considerably.

Signed-off-by: Tomi Valkeinen <[email protected]>
---
 drivers/video/omap2/dss/dsi.c |   15 +++++++++++----
 1 files changed, 11 insertions(+), 4 deletions(-)

diff --git a/drivers/video/omap2/dss/dsi.c b/drivers/video/omap2/dss/dsi.c
index 5672e40..ec5b879 100644
--- a/drivers/video/omap2/dss/dsi.c
+++ b/drivers/video/omap2/dss/dsi.c
@@ -2230,24 +2230,31 @@ int dsi_vc_send_bta_sync(int channel)
        if (r)
                goto err0;
 
-       r = dsi_vc_send_bta(channel);
+       r = dsi_register_isr(dsi_completion_handler, &completion,
+                       DSI_IRQ_ERROR_MASK);
        if (r)
                goto err1;
 
+       r = dsi_vc_send_bta(channel);
+       if (r)
+               goto err2;
+
        if (wait_for_completion_timeout(&completion,
                                msecs_to_jiffies(500)) == 0) {
                DSSERR("Failed to receive BTA\n");
                r = -EIO;
-               goto err1;
+               goto err2;
        }
 
        err = dsi_get_errors();
        if (err) {
                DSSERR("Error while sending BTA: %x\n", err);
                r = -EIO;
-               goto err1;
+               goto err2;
        }
-
+err2:
+       dsi_unregister_isr(dsi_completion_handler, &completion,
+                       DSI_IRQ_ERROR_MASK);
 err1:
        dsi_unregister_isr_vc(channel, dsi_completion_handler,
                        &completion, DSI_VC_IRQ_BTA);
-- 
1.7.1

--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to