Implement OMAP PM layer omap_pm_set_max_dev_wakeup_lat API by
creating a unified API which calls omap_device_set_dev_constraint
for all classes of constraints (devices wake-up latency, devices
throughput...).
The implementation of the constraints framework is at the omap_device
level: management and storage of the constraints, dispatching of the
constraints to the appropriate low level layers.
NOTE: only works for devices which have been converted to use
omap_device/omap_hwmod.
Longer term, we could possibly remove this API from the OMAP PM layer,
and instead directly use the device level API.
For the devices wake-up latency constraints, the power domains get
the next power state programmed directly in the registers via
pwrdm_wakeuplat_update_pwrst.
Note about PM QOS: the MPU and CORE power domains get the next power
state via cpuidle, which get the strongest wake-up latency constraint
by querying PM QOS. The usage of PM QOS is temporary, until a generic
solution is in place.
Based on Vibhore's original patch, adapted to omap_device, omap_hwmod
and PM QOS frameworks.
Signed-off-by: Jean Pihet <j-pi...@ti.com>
Cc: Vibhore Vardhan <vvard...@ti.com>
---
arch/arm/mach-omap2/omap_hwmod.c | 29 ++++-
arch/arm/mach-omap2/powerdomain.c | 99 +++++++++++++
arch/arm/mach-omap2/powerdomain.h | 24 +++-
arch/arm/mach-omap2/powerdomains3xxx_data.c | 63 +++++++++
arch/arm/plat-omap/include/plat/omap-pm.h | 6 +-
arch/arm/plat-omap/include/plat/omap_device.h | 14 ++
arch/arm/plat-omap/include/plat/omap_hwmod.h | 1 +
arch/arm/plat-omap/omap-pm-constraints.c | 161 ++++++++++------------
arch/arm/plat-omap/omap-pm-noop.c | 2 +-
arch/arm/plat-omap/omap_device.c | 187 +++++++++++++++++++++++++
10 files changed, 493 insertions(+), 93 deletions(-)
diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
index cf8cc9b..8caf2c5 100644
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -142,6 +142,7 @@
#include "powerdomain.h"
#include <plat/clock.h>
#include <plat/omap_hwmod.h>
+#include <plat/omap_device.h>
#include <plat/prcm.h>
#include "cm2xxx_3xxx.h"
@@ -2277,11 +2278,37 @@ ohsps_unlock:
return ret;
}
+/*
+ * omap_hwmod_update_power_state - Update the power domain power state of
+ * @oh
+ *
+ * @oh: struct omap_hwmod* to which the requesting device belongs to.
+ * @min_latency: the allowed wake-up latency for the power domain of @oh.
+ *
+ * Finds the power domain next power state that fulfills the constraint.
+ * Applies the constraint to the power domain by calling
+ * pwrdm_wakeuplat_update_pwrst.
+ *
+ * Returns 0 upon success.
+ */
+int omap_hwmod_update_power_state(struct omap_hwmod *oh, long min_latency)
+{
+ struct powerdomain *pwrdm = omap_hwmod_get_pwrdm(oh);
+
+ if (!PTR_ERR(pwrdm)) {
+ pr_err("omap_hwmod: Error: could not find parent "
+ "powerdomain for %s\n", oh->name);
+ return -EINVAL;
+ }
+
+ return pwrdm_wakeuplat_update_pwrst(pwrdm, min_latency);
+}
+
/**
* omap_hwmod_get_context_loss_count - get lost context count
* @oh: struct omap_hwmod *
*
- * Query the powerdomain of of @oh to get the context loss
+ * Query the powerdomain of @oh to get the context loss
* count for this device.
*
* Returns the context loss count of the powerdomain assocated with @oh
diff --git a/arch/arm/mach-omap2/powerdomain.c
b/arch/arm/mach-omap2/powerdomain.c
index eaed0df..496f245 100644
--- a/arch/arm/mach-omap2/powerdomain.c
+++ b/arch/arm/mach-omap2/powerdomain.c
@@ -19,6 +19,7 @@
#include <linux/list.h>
#include <linux/errno.h>
#include <linux/string.h>
+
#include "cm2xxx_3xxx.h"
#include "prcm44xx.h"
#include "cm44xx.h"
@@ -176,6 +177,104 @@ static int _pwrdm_post_transition_cb(struct powerdomain
*pwrdm, void *unused)
return 0;
}
+/*
+ * Test if the current powerdomain is MPU or CORE
+ *
+ * This function is only used by pwrdm_wakeuplat_update_pwrst
+ * which applies the MPU and CORE power domains constraints using PM QOS.
+ *
+ * This will disappear when all power domains will be controlled directly
+ * from the wake-up latency constraints framework
+ */
+static inline int is_pwrdm_mpu_or_core(struct powerdomain *pwrdm)
+{
+ if ((strncmp(pwrdm->name, "mpu_pwrdm", 9) == 0) ||
+ (strncmp(pwrdm->name, "core_pwrdm", 10) == 0))
+ return 1;
+ else
+ return 0;
+}
+
+/**
+ * pwrdm_wakeuplat_update_pwrst - Update power domain power state if needed
+ * @pwrdm: struct powerdomain * to which requesting device belongs to.
+ * @min_latency: the allowed wake-up latency for the given power domain.
+ *
+ * Finds the power domain next power state that fulfills the constraint.
+ * Programs a new target state if it is different from current power state.
+ *
+ * Returns 0 upon success.
+ */
+int pwrdm_wakeuplat_update_pwrst(struct powerdomain *pwrdm, long min_latency)
+{
+ int ret = 0, new_state = 0;
+
+ if (!pwrdm) {
+ WARN(1, "powerdomain: %s: invalid parameter(s)", __func__);
+ return -EINVAL;
+ }
+
+ /*
+ * Apply constraints to MPU and CORE via the PM QOS API.
+ * Every power domain struct has a pm_qos_request_list field
+ */
+ if (is_pwrdm_mpu_or_core(pwrdm)) {
+ if (pm_qos_request_active(&(pwrdm->pm_qos_request)))
+ pm_qos_remove_request(&(pwrdm->pm_qos_request));
+
+ if (min_latency >= 0)
+ pm_qos_add_request(&(pwrdm->pm_qos_request),
+ PM_QOS_CPU_DMA_LATENCY,
+ min_latency);
+ return 0;
+ }
+
+ /*
+ * Apply constraints to pwrdm other than MPU and CORE by programming
+ * the pwrdm next power state.
+ */
+
+ /* Find power state with wakeup latency < minimum constraint */
+ for (new_state = 0x0; new_state < PWRDM_MAX_PWRSTS; new_state++) {
+ if (min_latency == -1 ||
+ pwrdm->wakeup_lat[new_state] <= min_latency)
+ break;
+ }
+
+ switch (new_state) {
+ case PWRDM_FUNC_PWRST_OFF:
+ new_state = PWRDM_POWER_OFF;
+ break;
+ case PWRDM_FUNC_PWRST_OSWR:
+ pwrdm_set_logic_retst(pwrdm, PWRDM_POWER_OFF);
+ new_state = PWRDM_POWER_RET;
+ break;
+ case PWRDM_FUNC_PWRST_CSWR:
+ pwrdm_set_logic_retst(pwrdm, PWRDM_POWER_RET);
+ new_state = PWRDM_POWER_RET;
+ break;
+ case PWRDM_FUNC_PWRST_ON:
+ new_state = PWRDM_POWER_ON;
+ break;
+ default:
+ pr_warn("powerdomain: requested latency constraint not "
+ "supported %s set to ON state\n", pwrdm->name);
+ new_state = PWRDM_POWER_ON;
+ break;
+ }
+
+ if (pwrdm_read_pwrst(pwrdm) != new_state) {
+ ret = omap_set_pwrdm_state(pwrdm, new_state);
+ }
+
+ pr_debug("powerdomain: %s pwrst: curr=%d, prev=%d next=%d "
+ "min_latency=%ld, set_state=%d\n", pwrdm->name,
+ pwrdm_read_pwrst(pwrdm), pwrdm_read_prev_pwrst(pwrdm),
+ pwrdm_read_next_pwrst(pwrdm), min_latency, new_state);
+
+ return ret;
+}
+
/* Public functions */
/**
diff --git a/arch/arm/mach-omap2/powerdomain.h
b/arch/arm/mach-omap2/powerdomain.h
index 0b7a357..c796469 100644
--- a/arch/arm/mach-omap2/powerdomain.h
+++ b/arch/arm/mach-omap2/powerdomain.h
@@ -19,7 +19,10 @@
#include <linux/types.h>
#include <linux/list.h>
-
+#include <linux/plist.h>
+#include <linux/mutex.h>
+#include <linux/spinlock.h>
+#include <linux/pm_qos_params.h>
#include <linux/atomic.h>
#include <plat/cpu.h>
@@ -46,6 +49,15 @@
#define PWRSTS_OFF_RET_ON (PWRSTS_OFF_RET | (1 << PWRDM_POWER_ON))
+/* Powerdomain functional power states */
+#define PWRDM_FUNC_PWRST_OFF 0x0
+#define PWRDM_FUNC_PWRST_OSWR 0x1
+#define PWRDM_FUNC_PWRST_CSWR 0x2
+#define PWRDM_FUNC_PWRST_ON 0x3
+
+#define PWRDM_MAX_FUNC_PWRSTS 4
+
+#define UNSUP_STATE -1
/* Powerdomain flags */
#define PWRDM_HAS_HDWR_SAR (1 << 0) /* hardware save-and-restore support */
@@ -96,7 +108,11 @@ struct powerdomain;
* @state_counter:
* @timer:
* @state_timer:
- *
+ * @wakeup_lat: wakeup latencies for possible powerdomain power states
+ * Note about the wakeup latencies ordering: the values must be sorted
+ * in decremental order
+ * @pm_qos_request: PM QOS handle, only used to control the MPU and CORE power
+ * domains states; to be removed when a generic solution is in place.
* @prcm_partition possible values are defined in mach-omap2/prcm44xx.h.
*/
struct powerdomain {
@@ -121,6 +137,8 @@ struct powerdomain {
s64 timer;
s64 state_timer[PWRDM_MAX_PWRSTS];
#endif
+ const u32 wakeup_lat[PWRDM_MAX_FUNC_PWRSTS];
+ struct pm_qos_request_list pm_qos_request;
};
/**
@@ -210,6 +228,8 @@ int pwrdm_clkdm_state_switch(struct clockdomain *clkdm);
int pwrdm_pre_transition(void);
int pwrdm_post_transition(void);
int pwrdm_set_lowpwrstchange(struct powerdomain *pwrdm);
+
+int pwrdm_wakeuplat_update_pwrst(struct powerdomain *pwrdm, long min_latency);
u32 pwrdm_get_context_loss_count(struct powerdomain *pwrdm);
extern void omap2xxx_powerdomains_init(void);
diff --git a/arch/arm/mach-omap2/powerdomains3xxx_data.c
b/arch/arm/mach-omap2/powerdomains3xxx_data.c
index e1bec56..64973d1 100644
--- a/arch/arm/mach-omap2/powerdomains3xxx_data.c
+++ b/arch/arm/mach-omap2/powerdomains3xxx_data.c
@@ -31,6 +31,9 @@
/*
* Powerdomains
+ *
+ * The wakeup_lat values are derived from measurements on
+ * the actual target.
*/
static struct powerdomain iva2_pwrdm = {
@@ -52,6 +55,12 @@ static struct powerdomain iva2_pwrdm = {
[2] = PWRSTS_OFF_ON,
[3] = PWRDM_POWER_ON,
},
+ .wakeup_lat = {
+ [PWRDM_FUNC_PWRST_OFF] = 1100,
+ [PWRDM_FUNC_PWRST_OSWR] = UNSUP_STATE,
+ [PWRDM_FUNC_PWRST_CSWR] = 350,
+ [PWRDM_FUNC_PWRST_ON] = 0,
+ },
};
static struct powerdomain mpu_3xxx_pwrdm = {
@@ -68,6 +77,12 @@ static struct powerdomain mpu_3xxx_pwrdm = {
.pwrsts_mem_on = {
[0] = PWRSTS_OFF_ON,
},
+ .wakeup_lat = {
+ [PWRDM_FUNC_PWRST_OFF] = 95,
+ [PWRDM_FUNC_PWRST_OSWR] = UNSUP_STATE,
+ [PWRDM_FUNC_PWRST_CSWR] = 45,
+ [PWRDM_FUNC_PWRST_ON] = 0,
+ },
};
/*
@@ -98,6 +113,12 @@ static struct powerdomain core_3xxx_pre_es3_1_pwrdm = {
[0] = PWRSTS_OFF_RET_ON, /* MEM1ONSTATE */
[1] = PWRSTS_OFF_RET_ON, /* MEM2ONSTATE */
},
+ .wakeup_lat = {
+ [PWRDM_FUNC_PWRST_OFF] = 100,
+ [PWRDM_FUNC_PWRST_OSWR] = UNSUP_STATE,
+ [PWRDM_FUNC_PWRST_CSWR] = 60,
+ [PWRDM_FUNC_PWRST_ON] = 0,
+ },
};
static struct powerdomain core_3xxx_es3_1_pwrdm = {
@@ -121,6 +142,12 @@ static struct powerdomain core_3xxx_es3_1_pwrdm = {
[0] = PWRSTS_OFF_RET_ON, /* MEM1ONSTATE */
[1] = PWRSTS_OFF_RET_ON, /* MEM2ONSTATE */
},
+ .wakeup_lat = {
+ [PWRDM_FUNC_PWRST_OFF] = 100,
+ [PWRDM_FUNC_PWRST_OSWR] = UNSUP_STATE,
+ [PWRDM_FUNC_PWRST_CSWR] = 60,
+ [PWRDM_FUNC_PWRST_ON] = 0,
+ },
};
static struct powerdomain dss_pwrdm = {
@@ -136,6 +163,12 @@ static struct powerdomain dss_pwrdm = {
.pwrsts_mem_on = {
[0] = PWRDM_POWER_ON, /* MEMONSTATE */
},
+ .wakeup_lat = {
+ [PWRDM_FUNC_PWRST_OFF] = 70,
+ [PWRDM_FUNC_PWRST_OSWR] = UNSUP_STATE,
+ [PWRDM_FUNC_PWRST_CSWR] = 20,
+ [PWRDM_FUNC_PWRST_ON] = 0,
+ },
};
/*
@@ -157,6 +190,12 @@ static struct powerdomain sgx_pwrdm = {
.pwrsts_mem_on = {
[0] = PWRDM_POWER_ON, /* MEMONSTATE */
},
+ .wakeup_lat = {
+ [PWRDM_FUNC_PWRST_OFF] = 1000,
+ [PWRDM_FUNC_PWRST_OSWR] = UNSUP_STATE,
+ [PWRDM_FUNC_PWRST_CSWR] = UNSUP_STATE,
+ [PWRDM_FUNC_PWRST_ON] = 0,
+ },
};
static struct powerdomain cam_pwrdm = {
@@ -172,6 +211,12 @@ static struct powerdomain cam_pwrdm = {
.pwrsts_mem_on = {
[0] = PWRDM_POWER_ON, /* MEMONSTATE */
},
+ .wakeup_lat = {
+ [PWRDM_FUNC_PWRST_OFF] = 850,
+ [PWRDM_FUNC_PWRST_OSWR] = UNSUP_STATE,
+ [PWRDM_FUNC_PWRST_CSWR] = 35,
+ [PWRDM_FUNC_PWRST_ON] = 0,
+ },
};
static struct powerdomain per_pwrdm = {
@@ -187,6 +232,12 @@ static struct powerdomain per_pwrdm = {
.pwrsts_mem_on = {
[0] = PWRDM_POWER_ON, /* MEMONSTATE */
},
+ .wakeup_lat = {
+ [PWRDM_FUNC_PWRST_OFF] = 200,
+ [PWRDM_FUNC_PWRST_OSWR] = UNSUP_STATE,
+ [PWRDM_FUNC_PWRST_CSWR] = 110,
+ [PWRDM_FUNC_PWRST_ON] = 0,
+ },
};
static struct powerdomain emu_pwrdm = {
@@ -201,6 +252,12 @@ static struct powerdomain neon_pwrdm = {
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
.pwrsts = PWRSTS_OFF_RET_ON,
.pwrsts_logic_ret = PWRDM_POWER_RET,
+ .wakeup_lat = {
+ [PWRDM_FUNC_PWRST_OFF] = 200,
+ [PWRDM_FUNC_PWRST_OSWR] = UNSUP_STATE,
+ [PWRDM_FUNC_PWRST_CSWR] = 35,
+ [PWRDM_FUNC_PWRST_ON] = 0,
+ },
};
static struct powerdomain usbhost_pwrdm = {
@@ -223,6 +280,12 @@ static struct powerdomain usbhost_pwrdm = {
.pwrsts_mem_on = {
[0] = PWRDM_POWER_ON, /* MEMONSTATE */
},
+ .wakeup_lat = {
+ [PWRDM_FUNC_PWRST_OFF] = 800,
+ [PWRDM_FUNC_PWRST_OSWR] = UNSUP_STATE,
+ [PWRDM_FUNC_PWRST_CSWR] = 150,
+ [PWRDM_FUNC_PWRST_ON] = 0,
+ },
};
static struct powerdomain dpll1_pwrdm = {
diff --git a/arch/arm/plat-omap/include/plat/omap-pm.h
b/arch/arm/plat-omap/include/plat/omap-pm.h
index c0a7520..16f9e84 100644
--- a/arch/arm/plat-omap/include/plat/omap-pm.h
+++ b/arch/arm/plat-omap/include/plat/omap-pm.h
@@ -70,6 +70,10 @@ void omap_pm_if_exit(void);
* Device-driver-originated constraints (via board-*.c files, platform_data)
*/
+enum omap_pm_constraint_class {
+ OMAP_PM_CONSTRAINT_WKUP_LAT,
+ OMAP_PM_CONSTRAINT_THROUGHPUT
+};
/**
* omap_pm_set_max_mpu_wakeup_lat - set the maximum MPU wakeup latency
@@ -137,7 +141,7 @@ int omap_pm_set_max_mpu_wakeup_lat(struct device *dev, long
t);
* Returns -EINVAL for an invalid argument, -ERANGE if the constraint
* is not satisfiable, or 0 upon success.
*/
-int omap_pm_set_min_bus_tput(struct device *dev, u8 agent_id, unsigned long r);
+int omap_pm_set_min_bus_tput(struct device *dev, u8 agent_id, long r);
/**
diff --git a/arch/arm/plat-omap/include/plat/omap_device.h
b/arch/arm/plat-omap/include/plat/omap_device.h
index e4c349f..d4766c4 100644
--- a/arch/arm/plat-omap/include/plat/omap_device.h
+++ b/arch/arm/plat-omap/include/plat/omap_device.h
@@ -32,9 +32,11 @@
#define __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_OMAP_DEVICE_H
#include <linux/kernel.h>
+#include <linux/plist.h>
#include <linux/platform_device.h>
#include <plat/omap_hwmod.h>
+#include <plat/omap-pm.h>
extern struct device omap_device_parent;
@@ -73,6 +75,15 @@ struct omap_device {
s8 pm_lat_level;
u8 hwmods_cnt;
u8 _state;
+
+};
+
+/* Linked list for the devices constraints entries */
+struct omap_device_constraints_entry {
+ struct device *req_dev;
+ void *target;
+ unsigned long constraint_value;
+ struct plist_node node;
};
/* Device driver interface (call via platform_data fn ptrs) */
@@ -107,6 +118,9 @@ void __iomem *omap_device_get_rt_va(struct omap_device *od);
int omap_device_align_pm_lat(struct platform_device *pdev,
u32 new_wakeup_lat_limit);
struct powerdomain *omap_device_get_pwrdm(struct omap_device *od);
+int omap_device_set_dev_constraint(enum omap_pm_constraint_class class,
+ struct device *req_dev,
+ struct device *dev, long t);
u32 omap_device_get_context_loss_count(struct platform_device *pdev);
/* Other */
diff --git a/arch/arm/plat-omap/include/plat/omap_hwmod.h
b/arch/arm/plat-omap/include/plat/omap_hwmod.h
index 65bcad4..f27110e 100644
--- a/arch/arm/plat-omap/include/plat/omap_hwmod.h
+++ b/arch/arm/plat-omap/include/plat/omap_hwmod.h
@@ -597,6 +597,7 @@ int omap_hwmod_for_each_by_class(const char *classname,
void *user);
int omap_hwmod_set_postsetup_state(struct omap_hwmod *oh, u8 state);
+int omap_hwmod_update_power_state(struct omap_hwmod *oh, long min_latency);
u32 omap_hwmod_get_context_loss_count(struct omap_hwmod *oh);
/*
diff --git a/arch/arm/plat-omap/omap-pm-constraints.c
b/arch/arm/plat-omap/omap-pm-constraints.c
index c8b4e4c..4709f83 100644
--- a/arch/arm/plat-omap/omap-pm-constraints.c
+++ b/arch/arm/plat-omap/omap-pm-constraints.c
@@ -24,6 +24,7 @@
/* Interface documentation is in mach/omap-pm.h */
#include <plat/omap-pm.h>
#include <plat/omap_device.h>
+#include <plat/common.h>
static bool off_mode_enabled;
static u32 dummy_context_loss_counter;
@@ -32,35 +33,46 @@ static u32 dummy_context_loss_counter;
* Device-driver-originated constraints (via board-*.c files)
*/
-int omap_pm_set_max_mpu_wakeup_lat(struct device *dev, long t)
+/*
+ * Generic function to omap_device layer for the constraints API.
+ */
+static int omap_pm_set_dev_constraint(enum omap_pm_constraint_class class,
+ struct device *req_dev,
+ struct device *dev, long t)
{
- if (!dev || t < -1) {
+ int ret = 0;
+
+ if (!req_dev || !dev || t < -1) {
WARN(1, "OMAP PM: %s: invalid parameter(s)", __func__);
return -EINVAL;
- };
-
- if (t == -1)
- pr_debug("OMAP PM: remove max MPU wakeup latency constraint: "
- "dev %s\n", dev_name(dev));
- else
- pr_debug("OMAP PM: add max MPU wakeup latency constraint: "
- "dev %s, t = %ld usec\n", dev_name(dev), t);
+ }
- /*
- * For current Linux, this needs to map the MPU to a
- * powerdomain, then go through the list of current max lat
- * constraints on the MPU and find the smallest. If
- * the latency constraint has changed, the code should
- * recompute the state to enter for the next powerdomain
- * state.
- *
- * TI CDP code can call constraint_set here.
- */
+ /* Try to catch non omap_device for dev */
+ if (dev->parent == &omap_device_parent) {
+ if (t == -1)
+ pr_debug("OMAP PM: remove constraint of class %d "
+ "from req_dev %s on dev %s\n",
+ class, dev_name(req_dev), dev_name(dev));
+ else
+ pr_debug("OMAP PM: add constraint of class %d "
+ "from req_dev %s on dev %s, t = %ld\n",
+ class, dev_name(req_dev), dev_name(dev), t);
+
+ /* Call the omap_device API */
+ ret = omap_device_set_dev_constraint(class, req_dev, dev, t);
+ } else {
+ pr_err("OMAP-PM set_wakeup_lat: Error: platform device "
+ "not valid\n");
+ return -EINVAL;
+ }
- return 0;
+ return ret;
}
-int omap_pm_set_min_bus_tput(struct device *dev, u8 agent_id, unsigned long r)
+/*
+ * omap_pm_set_min_bus_tput - set/release bus throughput constraints
+ */
+int omap_pm_set_min_bus_tput(struct device *dev, u8 agent_id, long r)
{
if (!dev || (agent_id != OCP_INITIATOR_AGENT &&
agent_id != OCP_TARGET_AGENT)) {
@@ -68,83 +80,56 @@ int omap_pm_set_min_bus_tput(struct device *dev, u8
agent_id, unsigned long r)
return -EINVAL;
};
- if (r == 0)
- pr_debug("OMAP PM: remove min bus tput constraint: "
- "dev %s for agent_id %d\n", dev_name(dev), agent_id);
- else
- pr_debug("OMAP PM: add min bus tput constraint: "
- "dev %s for agent_id %d: rate %ld KiB\n",
- dev_name(dev), agent_id, r);
-
/*
- * This code should model the interconnect and compute the
- * required clock frequency, convert that to a VDD2 OPP ID, then
- * set the VDD2 OPP appropriately.
- *
- * TI CDP code can call constraint_set here on the VDD2 OPP.
+ * This code calls the generic omap_device API function
+ * omap_pm_set_dev_constraint with the class
+ * OMAP_PM_CONSTRAINT_THROUGHPUT. omap_pm_set_dev_constraint
+ * should manage the constraints lists and call the appropriate
+ * low level code that models the interconnect, computes the required
+ * clock frequency, converts that to a VDD2 OPP ID and sets the
+ * VDD2 OPP appropriately.
*/
-
- return 0;
+ return omap_pm_set_dev_constraint(OMAP_PM_CONSTRAINT_THROUGHPUT,
+ dev, dev, r);
}
+/*
+ * omap_pm_set_max_dev_wakeup_lat - set/release devices wake-up latency
+ * constraints
+ */
int omap_pm_set_max_dev_wakeup_lat(struct device *req_dev, struct device *dev,
long t)
{
- if (!req_dev || !dev || t < -1) {
- WARN(1, "OMAP PM: %s: invalid parameter(s)", __func__);
- return -EINVAL;
- };
-
- if (t == -1)
- pr_debug("OMAP PM: remove max device latency constraint: "
- "dev %s\n", dev_name(dev));
- else
- pr_debug("OMAP PM: add max device latency constraint: "
- "dev %s, t = %ld usec\n", dev_name(dev), t);
-
- /*
- * For current Linux, this needs to map the device to a
- * powerdomain, then go through the list of current max lat
- * constraints on that powerdomain and find the smallest. If
- * the latency constraint has changed, the code should
- * recompute the state to enter for the next powerdomain
- * state. Conceivably, this code should also determine
- * whether to actually disable the device clocks or not,
- * depending on how long it takes to re-enable the clocks.
- *
- * TI CDP code can call constraint_set here.
- */
-
- return 0;
+ return omap_pm_set_dev_constraint(OMAP_PM_CONSTRAINT_WKUP_LAT,
+ req_dev, dev, t);
}
-int omap_pm_set_max_sdma_lat(struct device *dev, long t)
+/*
+ * omap_pm_set_max_mpu_wakeup_lat - set/release MPU wake-up latency
+ * constraints
+ *
+ * Maps to omap_pm_set_dev_constraint with OMAP_PM_CONSTRAINT_WKUP_LAT
+ * as constraint class and the MPU device as constraints target.
+ */
+int omap_pm_set_max_mpu_wakeup_lat(struct device *req_dev, long t)
{
- if (!dev || t < -1) {
- WARN(1, "OMAP PM: %s: invalid parameter(s)", __func__);
- return -EINVAL;
- };
-
- if (t == -1)
- pr_debug("OMAP PM: remove max DMA latency constraint: "
- "dev %s\n", dev_name(dev));
- else
- pr_debug("OMAP PM: add max DMA latency constraint: "
- "dev %s, t = %ld usec\n", dev_name(dev), t);
-
- /*
- * For current Linux PM QOS params, this code should scan the
- * list of maximum CPU and DMA latencies and select the
- * smallest, then set cpu_dma_latency pm_qos_param
- * accordingly.
- *
- * For future Linux PM QOS params, with separate CPU and DMA
- * latency params, this code should just set the dma_latency param.
- *
- * TI CDP code can call constraint_set here.
- */
+ return omap_pm_set_dev_constraint(OMAP_PM_CONSTRAINT_WKUP_LAT,
+ req_dev, omap2_get_mpuss_device(),
+ t);
+}
- return 0;
+/*
+ * omap_pm_set_max_sdma_lat - set/release SDMA start latency
+ * constraints
+ *
+ * Currently maps to omap_pm_set_dev_constraint with
OMAP_PM_CONSTRAINT_WKUP_LAT
+ * as constraint class and the L3 device as constraints target.
+ */
+int omap_pm_set_max_sdma_lat(struct device *req_dev, long t)
+{
+ return omap_pm_set_dev_constraint(OMAP_PM_CONSTRAINT_WKUP_LAT,
+ req_dev, omap2_get_l3_device(),
+ t);
}
int omap_pm_set_min_clk_rate(struct device *dev, struct clk *c, long r)
diff --git a/arch/arm/plat-omap/omap-pm-noop.c
b/arch/arm/plat-omap/omap-pm-noop.c
index b0471bb2..7868edc 100644
--- a/arch/arm/plat-omap/omap-pm-noop.c
+++ b/arch/arm/plat-omap/omap-pm-noop.c
@@ -61,7 +61,7 @@ int omap_pm_set_max_mpu_wakeup_lat(struct device *dev, long t)
return 0;
}
-int omap_pm_set_min_bus_tput(struct device *dev, u8 agent_id, unsigned long r)
+int omap_pm_set_min_bus_tput(struct device *dev, u8 agent_id, long r)
{
if (!dev || (agent_id != OCP_INITIATOR_AGENT &&
agent_id != OCP_TARGET_AGENT)) {
diff --git a/arch/arm/plat-omap/omap_device.c b/arch/arm/plat-omap/omap_device.c
index 9bbda9a..b33b7fa 100644
--- a/arch/arm/plat-omap/omap_device.c
+++ b/arch/arm/plat-omap/omap_device.c
@@ -292,10 +292,189 @@ static void _add_optional_clock_clkdev(struct
omap_device *od,
}
}
+/* plist that stores the devices wake-up latency constraints */
+static struct plist_head omap_device_wkup_lat_constraints_list;
+/* Spinlock that protects the constraints lists */
+static spinlock_t omap_device_constraints_lock;
+/* Mutex that protects the constraints lists ops */
+static struct mutex omap_device_constraints_mutex;
+
+/*
+ * omap_device_store_constraint: add/update/remove a constraint from a plist
+ *
+ * @constraints_list: plist to use
+ * @req_dev: constraint requester, used to track the requests
+ * @target: target which the constraint applies to (e.g. power domain ID or
+ * ptr for wake-up latency constraints)
+ * @value: constraint value. The plist is sorted by the value. -1 remove the
+ * constraint from the list
+ *
+ * Returns the strongest constraint value for the given target, 0 in the
+ * case there is no constraint on the given target or a negative value in
+ * case of error.
+ * The caller must check the validity of the parameters.
+ */
+static long omap_device_store_constraint(struct plist_head *constraints_list,
+ struct device *req_dev, void *target,
+ long value)
+{
+ struct omap_device_constraints_entry *user;
+ int found = 0, ret = 0;
+
+ mutex_lock(&omap_device_constraints_mutex);
+
+ /* Check if the constraint requester is already in the list */
+ plist_for_each_entry(user, constraints_list, node) {
+ if (user->req_dev == req_dev) {
+ found = 1;
+ break;
+ }
+ }
+
+ if (value >= 0) {
+ /* Add new entry to the list or update existing request */
+ if (found &&
+ user->constraint_value == value &&
+ user->target == target) {
+ goto exit_ok;
+ } else if (!found) {
+ user = kzalloc(
+ sizeof(struct omap_device_constraints_entry),
+ GFP_KERNEL);
+ if (!user) {
+ pr_err("%s: FATAL ERROR: kzalloc failed\n",
+ __func__);
+ ret = -ENOMEM;
+ goto exit_error;
+ }
+ user->req_dev = req_dev;
+ } else {
+ plist_del(&user->node, constraints_list);
+ }
+
+ plist_node_init(&user->node, value);
+ plist_add(&user->node, constraints_list);
+ user->node.prio = user->constraint_value = value;
+ user->target = target;
+ } else {
+ /* Remove the constraint from the list */
+ if (!found) {
+ pr_err("%s: Error: no prior constraint to release\n",
+ __func__);
+ ret = -EINVAL;
+ goto exit_error;
+ }
+
+ plist_del(&user->node, constraints_list);
+ kfree(user);
+ }
+
+exit_ok:
+ /* Find the strongest constraint for the given target */
+ ret = 0;
+ plist_for_each_entry(user, constraints_list, node) {
+ if (user->target == target) {
+ ret = user->constraint_value;
+ break;
+ }
+ }
+
+exit_error:
+ mutex_unlock(&omap_device_constraints_mutex);
+
+ return ret;
+}
/* Public functions for use by core code */
/**
+ * omap_device_set_max_dev_wakeup_lat - set/release a device constraint
+ * @class: constraint class
+ * @dev: device to apply the constraint to. Must have an associated omap_device
+ * @req_dev: constraint requester, used for tracking the constraints
+ *
+ * Using the primary hwmod, set/release a device constraint for the dev
+ * device, requested by the req_dev device. Depending of the constraint class
+ * this code calls the appropriate low level code, e.g. power domain for
+ * the wake-up latency constraints.
+ *
+ * If any hwmods exist for the omap_device assoiated with @dev and @req_dev,
+ * set/release the constraint for the corresponding hwmods, otherwise return
+ * -EINVAL.
+ */
+int omap_device_set_dev_constraint(enum omap_pm_constraint_class class,
+ struct device *req_dev,
+ struct device *dev, long t)
+{
+ struct omap_device *od;
+ struct omap_hwmod *oh;
+ struct platform_device *pdev;
+ struct powerdomain *pwrdm = NULL;
+ u32 ret = -EINVAL;
+
+ /* Look for the platform device for dev */
+ pdev = to_platform_device(dev);
+
+ /* Try to catch non platform devices. */
+ if (pdev->name == NULL) {
+ pr_err("%s: Error: platform device for device %s not valid\n",
+ __func__, dev_name(dev));
+ return -EINVAL;
+ }
+
+ /* Find the associated omap_device for dev */
+ od = _find_by_pdev(pdev);
+ if (!(od->hwmods_cnt)) {
+ pr_err("%s: Error: No hwmod for device %s\n",
+ __func__, dev_name(dev));
+ return -EINVAL;
+ }
+
+ /* Find the associated omap_hwmod for dev */
+ oh = od->hwmods[0];
+
+ switch (class) {
+ case OMAP_PM_CONSTRAINT_WKUP_LAT:
+ /* Find the pwrdm associated to dev */
+ pwrdm = omap_device_get_pwrdm(od);
+ if (!pwrdm) {
+ pr_err("%s: Error: No pwrdm for device %s\n",
+ __func__, dev_name(dev));
+ ret = -EINVAL;
+ break;
+ }
+
+ /*
+ * Store the constraint in the appropriate list and find the
+ * strongest constraint for the given pwrdm
+ */
+ ret = omap_device_store_constraint(
+ &omap_device_wkup_lat_constraints_list,
+ req_dev, (void *) pwrdm, t);
+
+ /* Apply the constraint to the corresponding pwrdm */
+ if (ret >= 0) {
+ ret = omap_hwmod_update_power_state(oh, ret);
+ } else {
+ pr_err("%s: Error storing the constraint for device "
+ "%s\n", __func__, dev_name(dev));
+ }
+
+ break;
+ case OMAP_PM_CONSTRAINT_THROUGHPUT:
+ WARN(1, "OMAP PM: %s: Bus throughput constraint class \
+ not implemented\n", __func__);
+ ret = -EINVAL;
+ break;
+ default:
+ WARN(1, "OMAP PM: %s: invalid constraint class %d",
+ __func__, class);
+ }
+
+ return ret;
+}
+
+/**
* omap_device_get_context_loss_count - get lost context count
* @od: struct omap_device *
*
@@ -824,6 +1003,14 @@ struct device omap_device_parent = {
static int __init omap_device_init(void)
{
+ /* Initialize priority ordered list for wakeup latency constraint */
+ spin_lock_init(&omap_device_constraints_lock);
+ plist_head_init(&omap_device_wkup_lat_constraints_list,
+ &omap_device_constraints_lock);
+
+ /* res_mutex protects res_list add and del ops */
+ mutex_init(&omap_device_constraints_mutex);
+
return device_register(&omap_device_parent);
}
core_initcall(omap_device_init);
--
1.7.2.3
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
