From: Michael Fillinger <[email protected]> MCOP is an FPGA-based Silicon Validation platform which is used to test particular IPs inside OMAP before we have a real ASIC.
Signed-off-by: Michael Fillinger <[email protected]> [ [email protected] : few cleanups here an there and also removal of some unnecessary code. ] Signed-off-by: Felipe Balbi <[email protected]> --- arch/arm/mach-omap2/Kconfig | 7 +++ arch/arm/mach-omap2/Makefile | 1 + arch/arm/mach-omap2/board-mcop.c | 60 ++++++++++++++++++++++++++ arch/arm/plat-omap/include/plat/uncompress.h | 1 + 4 files changed, 69 insertions(+), 0 deletions(-) create mode 100644 arch/arm/mach-omap2/board-mcop.c diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index 1a2cf62..6f5699f 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -116,6 +116,13 @@ config MACH_OMAP_H4 select OMAP_PACKAGE_ZAF select OMAP_DEBUG_DEVICES +config MACH_OMAP_MCOP + bool "OMAP MCOP Board" + depends on ARCH_OMAP2420 + default y +# select OMAP_PACKAGE_ZAF +# select OMAP_DEBUG_DEVICES + config MACH_OMAP_APOLLON bool "OMAP 2420 Apollon board" depends on ARCH_OMAP2420 diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index 1c0c2b0..6db99c4 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -153,6 +153,7 @@ endif # Specific board support obj-$(CONFIG_MACH_OMAP_GENERIC) += board-generic.o obj-$(CONFIG_MACH_OMAP_H4) += board-h4.o +obj-$(CONFIG_MACH_OMAP_MCOP) += board-mcop.o obj-$(CONFIG_MACH_OMAP_2430SDP) += board-2430sdp.o \ hsmmc.o obj-$(CONFIG_MACH_OMAP_APOLLON) += board-apollon.o diff --git a/arch/arm/mach-omap2/board-mcop.c b/arch/arm/mach-omap2/board-mcop.c new file mode 100644 index 0000000..b9fe1a4 --- /dev/null +++ b/arch/arm/mach-omap2/board-mcop.c @@ -0,0 +1,60 @@ +/* + * board-mcop.c - OMAP pre-Silicon Validation Platform + * + * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com + * Author: Michael Fillinger <[email protected]> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/io.h> + +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/map.h> + +#include <plat/common.h> +#include <plat/irqs.h> + +#include <mach/hardware.h> + +static void __init omap_mcop_init_irq(void) +{ + omap2_init_common_infrastructure(); + omap2_init_common_devices(NULL, NULL); + omap_init_irq(); +} + +static void __init omap_mcop_init(void) +{ + omap_serial_init(); +} + +static void __init omap_mcop_map_io(void) +{ + omap2_set_globals_242x(); + omap242x_map_common_io(); +} + +MACHINE_START(OMAP_MCOP, "OMAP MCOP Board") + /* Maintainer: Michael Fillinger <[email protected]> */ + + /* + * REVISIT What values to put here so that it works + * on all versions of MCOP + * + * .phys_io = 0x48000000, + * .io_pg_offst = ((0xfa000000) >> 18) & 0xfffc, + */ + + .boot_params = 0x80000100, + .map_io = omap_mcop_map_io, + .reserve = omap_reserve, + .init_irq = omap_mcop_init_irq, + .init_machine = omap_mcop_init, + .timer = &omap_timer, +MACHINE_END diff --git a/arch/arm/plat-omap/include/plat/uncompress.h b/arch/arm/plat-omap/include/plat/uncompress.h index ad98b85..dbedd6e 100644 --- a/arch/arm/plat-omap/include/plat/uncompress.h +++ b/arch/arm/plat-omap/include/plat/uncompress.h @@ -129,6 +129,7 @@ static inline void __arch_decomp_setup(unsigned long arch_id) DEBUG_LL_OMAP2(1, omap_2430sdp); DEBUG_LL_OMAP2(1, omap_apollon); DEBUG_LL_OMAP2(1, omap_h4); + DEBUG_LL_OMAP2(1, omapmcop); /* omap2 based boards using UART3 */ DEBUG_LL_OMAP2(3, nokia_n800); -- 1.7.4.1.343.ga91df -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
