Kevin Hilman <khil...@ti.com> writes:

> "Varadarajan, Charulatha" <ch...@ti.com> writes:
>
>> Kevin,
>>
>> On Sat, Apr 23, 2011 at 04:32, Kevin Hilman <khil...@ti.com> wrote:
>>> Remove cpu_is_* checks from gpio_show_revision() by passing in the
>>> revision address offset from platform data.  SoCs with no revision
>>> register (15xx, 7xx, and all MPUIOs) use -1 to signify no register.
>>>
>>> While here, all GPIO banks are assumed to be the same revision, so fix
>>> show_revision() to only show the revision for the first bank it finds.
>>> This removes duplicate GPIO revision prints during boot.
>>>
>>> Signed-off-by: Kevin Hilman <khil...@ti.com>
>>> ---
>>>  arch/arm/mach-omap1/gpio15xx.c         |    2 ++
>>>  arch/arm/mach-omap1/gpio16xx.c         |    2 ++
>>>  arch/arm/mach-omap1/gpio7xx.c          |    2 ++
>>>  arch/arm/mach-omap2/gpio.c             |    2 ++
>>>  arch/arm/plat-omap/gpio.c              |   14 ++++++--------
>>>  arch/arm/plat-omap/include/plat/gpio.h |    1 +
>>>  6 files changed, 15 insertions(+), 8 deletions(-)
>>>
>>> diff --git a/arch/arm/mach-omap1/gpio15xx.c b/arch/arm/mach-omap1/gpio15xx.c
>>> index 9175624..6f77c36 100644
>>> --- a/arch/arm/mach-omap1/gpio15xx.c
>>> +++ b/arch/arm/mach-omap1/gpio15xx.c
>>> @@ -35,6 +35,7 @@ static struct __initdata resource 
>>> omap15xx_mpu_gpio_resources[] = {
>>>  };
>>>
>>>  static struct omap_gpio_reg_offs omap15xx_mpuio_regs = {
>>> +       .revision       = -1,
>>
>> Assigning -1 to u16 type. Instead you may want to use 0xffff?
>>
>
> The compiler will do the right thing, so personally, I prefer using -1.
> It's safer if/when the type is changed, but the mask not updated.

Actually, you're right here.

While the compiler does the "right thing" for the assignment, it was not
doing the right thing for the comparision in the driver for the revision
check, and thus trying to read from offset 0xffff on OMAP1 for MPUIO
banks (that's probably the reason for a boot hang for you on 17xx.)
At least for me, with this change it's booting on OMAP1 (omap5912/OSK
for me.)

I'll change the usage of -1 here to USHRT_MAX.

Thanks,

Kevin
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to